Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota 4Runner 1996-2003 Approved SIL techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 024runne br fbp repl
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download repl documenatation <<Text preview - extract from the document BR-13
BRAKE - FRONT BRAKE PAD
BR07Y-02
REPLACEMENT
1. REMOVE FRONT WHEEL
2. INSPECT PAD LINING THICKNESS
Check the pad thickness and replace pads if not within the
specification.
Minimum thickness: 1.0 mm (0.039 in.)
W01673
3. REMOVE CLIP, 2 PINS, ANTI- RATTLE SPRING, 2
PADS AND 4 ANTI-SQUEAL SHIMS
NOTICE:
The anti-rattle spring can be used again provided that they
have sufficient rebound, no deformation, cracks or wear,
and have had all rust, dirt and foreign particles cleaned off.
4. CHECK DISC THICKNESS AND RUNOUT
(See page BR-18 )
W01674 5. INSTALL NEW PADS
NOTICE:
When replacing worn pads, the anti-squeal shims must be
replaced together with the pads.
(a) Draw out a small amount of brake fluid from the reservoir.
(b) Press in the pistons with a monkey wrench handle or an
equivalent.
HINT:
S Tape the monkey wrench handle before use.
S Always change the pad on one wheel at a time as there
is a possibility of the opposite piston flying out.
S If the piston is difficult to push in, loosen the bleeder plug
and push in the piston while letting some brake fluid es-
W01675 cape.
(c) Install the anti-squeal shims to new pads.
HINT:
Apply disc brake grease to both sides of the inner anti-squeal
shims (See page BR-12 ).
(d) Install the 2 pads.
NOTICE:
Do not allow oil or grease to get on the rubbing face.
6. INSTALL ANTI-RATTLE SPRING AND 2 PINS
7. INSTALL CLIP
2002 4RUNNER (RM887U)
Author : Date : 1320
BR-14
BRAKE - FRONT BRAKE PAD
8. INSTALL FRONT WHEEL
Torque: 103 N
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo