Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota 4Runner 1996-2003 Approved SIL techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 024runne di abswebdb cic12464

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
cic12464


>> Download cic12464 documenatation <<

Text preview - extract from the document
DI-294
                                                   DIAGNOSTICS      -   ABS WITH EBD & BA & TRAC & VSC SYSTEM
                                                                                                                                  DI6BQ-04




  DTC                C1246 / 46                        Master Cylinder Pressure Sensor
                                                       Circuit

CIRCUIT DESCRIPTION
    DTC No.                          DTC Detecting Condition                                             Trouble Area
                  Any of the conditions 1. through 5. is detected:
                  1. At the vehicle speed of 7 km/h (4 mph) or more, ECU
                     terminal PMC voltage becomes more than 0.86 V and
                     the condition that 0.01 V or less does not change con-
                     tinues for 30 sec.
                  2. Interference occurs to ECU terminal PMC 7 times or
                     more in 5 sec.
                  3. ECU terminal STP is OFF, and the condition that termi-     S Master cylinder pressure sensor
   C1246 / 46
                     nal PMC voltage becomes more than 0.86 V or less than      S Master cylinder pressure sensor circuit
                     0.3 V continues for 5 sec. or more.
                  4. The condition that ECU terminal IG1 voltage is 9.5 V to
                     17.0 V, and terminal VCM voltage is out of the range
                     from 4.4 V to 5.6 V continues for 1.2 sec. or more.
                  5. The condition that ECU terminal VCM voltage is 4.4 V to
                     5.6 V, and terminal PMC voltage is out of the range from
                     0.14 V to 4.85 V continues for 1.2 sec. or more.


WIRING DIAGRAM

                M4                                                                                             Skid Control ECU
                Master Cylinder
                Pressure Sensor
                                                                                                             24
                                                                                    BR
                                                                                                             V16 MSS
                                                               (Shielded)
                                                                                                              23
                                                                    R
                           E2                                                                                V16 E2
                                 3

                                                                                                              22
                                                                    W
                        PMC                                                                                  V16 PMC
                                 2

                                                                                                              10
                                                                    B
                        VCM                                                                                  V16 VCM
                                 1



                                                                                                                                   F14345




2002 4RUNNER (RM887U)

                                                                                  Author :                     Date :               470
                                                                                                              DI-295
                                        DIAGNOSTICS     -   ABS WITH EBD & BA & TRAC & VSC SYSTEM

INSPECTION PROCEDURE
HINT:
Start the inspection from step 1 in case of using the hand-held tester and start from step 2 in case of not
using the hand-held tester.

   1     Check output value of master cylinder pressure sensor.

PREPARATION:
(a) Connect the hand-held tester to DLC3.
(b) Turn the ignition switch ON and push the hand-held tester main switch ON.
(c) Select the DATALIST mode on the hand-held tester.
CHECK:
Check that the brake fluid pressure value of the master cylinder pressure sensor displayed on the hand-held
tester is changing when the brake pedal is depressed.
OK:
      Brake fluid pressure value must be changing.

                                                OK          Go to step 4.


   NG



   2     Check master cylinder pressure sensor.

                                              PREPARATION:
                                              Install LSPV gauge to the front caliper bleeder plug portion, and
                                              bleed LSPV gauge.
  PMC
                                                     SST 09709-29018
                                              CHECK:
                                              Start the engine and depress the brake pedal, then check the
                            E2                relation between the fluid pressure and voltage of PMC and E2
                                              terminals of the master cylinder pressure sensor with the con-
                                     F12700   nector still connected.
                                              OK:
                                                 Front brake caliper fluid pressure                Voltage
                                                      0 kPa (0   Kgf/cm2,   0 psi)            0.37 - 0.63 V
                                                  5,883 kPa (60   kgf/cm2,   853 psi)         1.57 - 1.83 V
                                                11,768 kPa (120   kgf/cm2,   1,706 psi)       2.77 - 3.03 V

                                              HINT:
                                              Voltage of between terminals VCM and E2: 4.7 - 5.3 V

                                                NG          Replace master cylinder pressure sensor.


   OK



2002 4RUNNER (RM887U)

                                                                      Author :            Date :               471
DI-296
                                  DIAGNOSTICS   -   ABS WITH EBD & BA & TRAC & VSC SYSTEM



   3     Check for open and short circuit in harness and connector between master cyl-
         inder pressure sensor and skid control ECU (See page IN-28 ).


                                        NG          Repair or replace harness or connector.


  OK



   4     Check whether or not ECU terminal STP input voltage is changed when stop
         light switch is turned on and off.


                                        NO          Check stop light switch circuit (See page
                                                    BE-40 ).


  YES



  Check and replace skid control ECU.




2002 4RUNNER (RM887U)

                                                           Author :              Date :         472



◦ Jabse Service Manual Search 2026 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo