Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota 4Runner 1996-2003 Approved SIL techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 024runne di rs tctermin

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
tctermin


>> Download tctermin documenatation <<

Text preview - extract from the document
                                                                                                             DI-465
                                                DIAGNOSTICS   -   SUPPLEMENTAL RESTRAINT SYSTEM
                                                                                                                 DI192-33




 Tc Terminal Circuit

CIRCUIT DESCRIPTION
By connecting terminals Tc and E1 of the DLC1 the airbag sensor assembly is set in the DTC output mode.
The DTCs are displayed by blinking the SRS warning light.

WIRING DIAGRAM
                  D1
                  DLC1                                                                  Airbag Sensor Assembly
                                                                  J6
                                                                  J/C
                                       23                                             19
                              11 GR                   G-R     B         B     GR
                         Tc            II4                                           C21 Tc



                              3        BR
                         E1

                                                       EC




                                                                                                                 H07399




INSPECTION PROCEDURE
If the DTC is not displayed, do the following troubleshooting.

    1       Does SRS warning light light up for approx. 6 seconds?

                                                      PREPARATION:
  LOCK                                                Check operation of the SRS warning light after ignition switch
                               ACC           ON
                                                      is turned from LOCK position to ACC or ON position.

                                  or




                                                        NO        Check SRS warning light system.
 AB0117 AB0118 AB0119
                                             H07393
                                                                  (See page DI-377 )
 W01632




  YES



2002 4RUNNER (RM887U)

                                                                        Author :           Date :                641
DI-466
                                           DIAGNOSTICS   -   SUPPLEMENTAL RESTRAINT SYSTEM



   2       Check voltage between terminals Tc and E1 of DLC1.

         ACC      ON                           PREPARATION:
                                               Turn ignition switch to ACC or ON.
           or                                  CHECK:
                                 E1            Measure the voltage between terminals Tc and E1 of DLC1.
                                      Tc
                                               OK:
                                                     Voltage: 10 - 14 V
                (-)        (+)
AB0118 AB0119
R14305                                H00030



                                                 OK          Go to step 4.


  NG



   3       Check voltage between terminal Tc of DLC1 and body ground.

         ACC          ON                       CHECK:
                                               Measure the voltage between terminal Tc of DLC1 and body
                                 Tc
           or                                  ground.
                                               OK:
                                                    Voltage: 10 - 14 V

                (-)        (+)


AB0118 AB0119
R14304                                H00031



                                                 OK          Check harness between terminal E1 of DLC1
                                                             and body ground.


  NG




2002 4RUNNER (RM887U)

                                                                    Author :           Date :       642
                                                                                                   DI-467
                                        DIAGNOSTICS   -   SUPPLEMENTAL RESTRAINT SYSTEM



   4       Check airbag sensor assembly.

                                            PREPARATION:
 LOCK                     ACC      ON       (a) Turn ignition switch to LOCK.
                                            (b) Disconnect negative (-) terminal cable from the battery,
                            or                   and wait at least for 90 seconds.
          Airbag Sensor Assembly            (c) Disconnect the airbag sensor assembly connector.
                                            (d) Insert service wire into terminal Tc from back side as
                                                 shown in the illustration.
                                            (e) Connect the airbag sensor assembly connector with ser-
                                                 vice wire.
                                            (f)  Connect negative (-) terminal cable to the battery.
                                            (g) Turn ignition switch to ACC or ON and wait at least for 20
                                                 seconds.
                           Tc
                                            (h) Connect service wire of terminal Tc to body ground.
AB0117 AB0118 AB0119
H01302                             H01303   CHECK:
                                            Check operation of SRS warning light.
                                            OK:
                                                 SRS waning light comes on.
                                            NOTICE:
                                            Pay due attention to the terminal connecting position to
                                            avoid a malfunction.

                                              OK          Check harness between the airbag sensor as-
                                                          sembly and DLC1.


  NG



 Replace airbag sensor assembly.




2002 4RUNNER (RM887U)

                                                                Author :           Date :           643
DI-468
                                          DIAGNOSTICS   -   SUPPLEMENTAL RESTRAINT SYSTEM

If the DTC is displayed without a DTC check procedure, perform the following
troubleshooting.

    1     Check resistance between terminal Tc of airbag sensor assembly and body
          ground.

 LOCK            Airbag Sensor Assembly         PREPARATION:
                                                (a) Turn ignition switch to LOCK.
                                                (b) Disconnect negative (-) terminal cable from the battery,
                                                     and wait at least for 90 seconds.
                                  Tc            (c) Disconnect the airbag sensor assembly connector.
                                                CHECK:
           (-)    (+)                           Check the resistance between terminal Tc of the airbag sensor
                                                assembly connector and body ground.
 AB0119
 H01304                                H01305   OK:
                                                     Resistance: 1 M or Higher

                                                  NG        Repair or replace harness or connector.


   OK



  Replace airbag sensor assembly.




2002 4RUNNER (RM887U)

                                                                  Author :            Date :            644



◦ Jabse Service Manual Search 2026 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo