Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota 4Runner 1996-2003 Approved SIL techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 024runne di rs cib01367
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download cib01367 documenatation <<
Text preview - extract from the document
DI-438
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
DI1BJ-16
DTC B0136/74 Open in P/T Squib (LH) Circuit
CIRCUIT DESCRIPTION
The P/T squib circuit (LH) consists of the airbag sensor assembly and seat belt pretensioner (LH).
It causes the seat belt pretensioner (LH) to activate when the seat belt pretensioner (LH) activation condi-
tions are satisfied.
For details of the function of each component, see OPERATION on page RS-2 .
DTC B0136/74 is recorded when an open is detected in the P/T squib (LH) circuit.
DTC No. DTC Detecting Condition Trouble Area
S Open circuit in PL+ wire harness or PL- wire harness of
S Seat belt pretensioner (LH)
squib
B0136/74 S Airbag sensor assembly
S P/T squib (LH) malfunction
S Wire harness
S Airbag sensor assembly malfunction
WIRING DIAGRAM
See page DI-434 .
INSPECTION PROCEDURE
1 Prepare for inspection. (See step 1 on page DI-456 )
2 Check P/T squib (LH) circuit.
CHECK:
For the connector (on the seat belt pretensioner side) between
Airbag
Sensor the seat belt pretensioner (LH) and the airbag sensor assembly,
P/T Squib (LH)
Assembly measure the resistance between PL+ and PL-.
OK:
Resistance: Below 1
PL+ PL-
NG Repair or replace harness or connector be-
tween seat belt pretensioner (LH) and airbag
(+) (-) sensor assembly.
H01016
H02141 H02213
OK
2002 4RUNNER (RM887U)
Author : Date : 614
DI-439
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
3 Check airbag sensor assembly.
P/T Squib (LH) PREPARATION:
(a) Connect the connector to the airbag sensor assembly.
Airbag (b) Using a service wire, connect PL+ and PL- of the connec-
Sensor
tor (on the seat belt pretensioner side) between the seat
Assembly
belt pretensioner (LH) and the airbag sensor assembly.
(c) Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
PL+ PL- ACC ON CHECK:
(a) Turn ignition switch to ACC or ON and wait at least for 20
seconds.
or (b) Clear DTC stored in memory.
(See page DI-377 )
DLC1 (c) Turn ignition switch to LOCK, and wait at least for 20 se-
DTC B0136/74 conds.
(d) Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
(e) Check DTC.
E1 Tc
H01017 (See page DI-377 )
H02139
AB0118 AB0119 OK:
R13006 H01087 H02214
DTC B0136/74 is not output.
HINT:
Codes other than code B0136/74 may be output at this time, but
they are not relevant to this check.
NG Replace airbag sensor assembly.
OK
2002 4RUNNER (RM887U)
Author : Date : 615
DI-440
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
4 Check P/T squib (LH).
PREPARATION:
P/T Squib (LH) (a) Turn ignition switch to LOCK.
(b) Disconnect negative (-) terminal cable from the battery,
Airbag
Sensor and wait at least for 90 seconds.
Assembly (c) Connect the seat belt pretensioner (LH) connector.
(d) Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
ACC ON CHECK:
(a) Turn ignition switch to ACC or ON, and wait at least for 20
or seconds.
(b) Clear DTC stored in memory.
(See page DI-377 )
DLC1
DTC B0136/74 (c) Turn ignition switch to LOCK, and wait at least for 20 se-
conds.
(d) Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
E1 Tc (e) Check DTC.
H01018
(See page DI-377 )
AB0118 AB0119
R13006 H01087 H01232 OK:
DTC B0136/74 is not output.
HINT:
Codes other than code B0136/74 may be output at this time, but
they are not relevant to this check.
NG Replace seat belt pretensioner (LH).
OK
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check.
2002 4RUNNER (RM887U)
Author : Date : 616
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo