Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota 4Runner 1996-2003 Approved SIL techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 024runne em5vzfe enguni4w remo
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download remo documenatation <<
Text preview - extract from the document
EM-73
ENGINE MECHANICAL (5VZ-FE) - ENGINE UNIT (4WD)
EM1MT-02
REMOVAL
1. REMOVE TRANSMISSION (See page AT-19 )
2. REMOVE ENGINE UNDER COVER
3. DRAIN ENGINE COOLANT AND OIL
4. REMOVE HOOD
5. REMOVE RADIATOR ASSEMBLY (See page CO-18 )
6. REMOVE FAN WITH FLUID COUPLING AND FAN PUL-
LEYS
7. REMOVE AIR CLEANER ASSEMBLY
8. DISCONNECT ACCELERATOR CABLE FROM
THROTTLE BODY
9. DISCONNECT HEATER HOSES
A15268
10. DISCONNECT HOSES
(a) Disconnect the EVAP hose.
(b) Disconnect the CCV hose.
(a)
(b) A15270
(c) Disconnect the fuel return hose.
(d) (d) Disconnect the fuel inlet hose.
(e)
A07331
11. DISCONNECT STARTER WIRE AND CONNECTORS
(a) Remove the bolt, and disconnect the ground strap.
(b) Remove the 2 nut, and disconnect the positive (+) termi-
nal cable from the battery.
(c) Disconnect the 2 starter wire clamps and connector.
(d) Remove the nut, and disconnect the wire from the relay
block No.2.
12. DISCONNECT GENERATOR WIRE (See page
S02115 CH-6 )
2002 4RUNNER (RM887U)
Author : Date : 885
EM-74
ENGINE MECHANICAL (5VZ-FE) - ENGINE UNIT (4WD)
(b) 13. DISCONNECT ENGINE WIRE FROM CABIN
(a) Remove the glove compartment door.
(b) Remove the lower finish No.2 panel.
(a) (c) Disconnect the 5 ECM connectors.
(d) Disconnect the 2 cassette connectors (cowl wire x engine
wire) and 2 wire clamps from the lower finish panel.
P22498
(e) Disconnect the engine wire clamp.
(h) (f) Disconnect the igniter connector.
(g) Disconnect the ground strap.
(g)
(f) A07332
(h) Disconnect the VSV connector for the EVAP.
(i)
(i) Disconnect the VSV connector for the CCV and clamp.
(h)
A15271
(j) Remove the bolt and wire bracket.
(k) Remove the 2 nuts holding the engine wire retainer to the
cowl panel, and pull out the engine wire from the cabin.
S02117
No.2 14. REMOVE ENGINE
Engine Hanger (a) w/ A/C:
Remove the bolt and disconnect the A/C compressor wire
clamp.
A15557
2002 4RUNNER (RM887U)
Author : Date : 886
EM-75
ENGINE MECHANICAL (5VZ-FE) - ENGINE UNIT (4WD)
(b) Install the No. 2 engine hanger with the bolt in the correct
direction.
Parts No.:
No. 2 engine hanger 12282-62050
Bolt 90119-10684
Torque: 45 N◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo