Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota 4Runner 1996-2003 Approved SIL techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 024runne em5vzfe timbel insp
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download insp documenatation <<
Text preview - extract from the document
EM-17
ENGINE MECHANICAL (5VZ-FE) - TIMING BELT
EM01J-05
INSPECTION
No! 1. INSPECT TIMING BELT
NOTICE:
S Do not bend, twist or turn the timing belt inside out.
S Do not allow the timing belt to come into contact with
oil, water or steam.
S Do not utilize timing belt tension when installing or re-
moving the mount bolt of the camshaft timing pulley.
A01568
If there are any defects, as shown in the illustrations, check
these points:
(1) Premature parting
Check for proper installation.
Check the timing cover gasket for damage and
proper installation.
(2) If the belt teeth are cracked or damaged, check to
see if either camshaft is locked.
(3) If there is noticeable wear or cracks on the belt face,
check to see if there are nicks on the side of the idler
pulley lock and water pump.
(4) If there is wear or damage on only one side of the
belt, check the belt guide and the alignment of each
pulley.
(5) If there is noticeable wear on the belt teeth, check
the timing cover for damage, correct gasket installa-
tion, and for foreign material on the pulley teeth.
If necessary, replace the timing belt.
2. INSPECT IDLER PULLEYS
(a) Visually check the seal portion of the idler pulley for oil
leakage.
If leakage is found, replace the idler pulley.
P20043
(b) Check that the idler pulley turns smoothly.
If necessary, replace the idler pulley.
P12604
2002 4RUNNER (RM887U)
Author : Date : 829
EM-18
ENGINE MECHANICAL (5VZ-FE) - TIMING BELT
3. INSPECT TIMING BELT TENSIONER
(a) Visually check the seal portion of the tensioner for oil leak-
age.
HINT:
If there is only the faintest trace of oil on the seal on the push
rod side, the tensioner is all right.
If leakage is found, replace the tensioner.
P18782
(b) Hold the tensioner with both hands and push the push rod
strongly as shown to check that it doesn't move.
If the push rod moves, replace the tensioner.
NOTICE:
Never hold the tensioner push rod facing downward.
P18764
(c) Measure the protrusion of the push rod from the housing
Protrusion end.
Protrusion: 10.0 - 10.8 mm (0.394 - 0.425 in.)
If the protrusion is not as specified, replace the tensioner.
P18770
2002 4RUNNER (RM887U)
Author : Date : 830
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo