Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota 4Runner 1996-2003 Approved SIL techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 024runne em5vzfe timbel remo

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document
remo

>> Download remo documenatation <<

Text preview - extract from the document

EM-13
ENGINE MECHANICAL (5VZ-FE) - TIMING BELT
EM01I-14

REMOVAL
1. REMOVE ENGINE UNDER COVER
2. DRAIN ENGINE COOLANT
3. DISCONNECT UPPER RADIATOR HOSE

4. DISCONNECT PS PUMP FROM ENGINE
(a) Disconnect the 2 PS air hoses from the air intake chamber
and resonator.
(b) Remove the bolt holding the PS pressure tube clamp to
the frame.
(c) Remove the drive belt (See page SR-33 ).
(d) Remove the bolt and nut, and disconnect the PS pump
from the engine.
S02356

5. w/ A/C:
DISCONNECT A/C COMPRESSOR FROM ENGINE
(a) Disconnect the A/C compressor connector.
(b) Remove the drive belt (See page AC-17 ).
(c) Remove the 4 bolts, and disconnect the A/C compressor
from the engine.
6. LOOSEN FAN WITH FLUID COUPLING AND FAN PUL-
LEYS
S02357 7. REMOVE DRIVE BELT FOR GENERATOR (See page
CH-6 )
8. REMOVE NO.2 FAN SHROUD
9. REMOVE FAN WITH FLUID COUPLING AND FAN PUL-
LEYS

10. w/ A/C:
REMOVE A/C COMPRESSOR BRACKET
Remove the 5 bolts and A/C compressor bracket.
11. REMOVE OIL DIPSTICK AND GUIDE
Remove the bolt, oil dipstick, guide and O-ring.

S02107

2002 4RUNNER (RM887U)

Author : Date : 825
EM-14
ENGINE MECHANICAL (5VZ-FE) - TIMING BELT

12. REMOVE NO.2 TIMING BELT COVER
(a) Disconnect the 4 high-tension cord clamps from the No.2
timing belt cover.
(b) Remove the 6 bolts and No.2 timing belt cover.
(c) Disconnect the camshaft position sensor connector.

S02424

13. REMOVE FAN BRACKET
(a) Remove the nut and PS pump adjusting strut.
(b) Remove the bolt, nut and fan bracket.

P20830

14. REMOVE CRANKSHAFT PULLEY
SST (a) Using SST, loosen the pulley bolt.
SST 09213-54015 (90119-08216), 09330-00021
(b) Remove the SST, pulley bolt and pulley.

SST

P20516

HINT:
If necessary, remove the pulley with SST and a service bolt.
SST 09950- 50013 (09951- 05010, 09952- 05010,
09953-05020, 09954-05031)

SST

Service Bolt
P20515

15. REMOVE STARTER WIRE BRACKET AND NO.1 TIM-
ING BELT COVER
(a) Remove the 2 bolts and starter wire bracket.
(b) Remove the 4 bolts and timing belt cover.
16. REMOVE TIMING BELT GUIDE

S01417

2002 4RUNNER (RM887U)

Author : Date : 826
EM-15
ENGINE MECHANICAL (5VZ-FE) - TIMING BELT

17. SET NO.1 CYLINDER AT TDC/COMPRESSION
(a) Temporarily install the crankshaft pulley bolt to the crank-
shaft.
(b) Turn the crankshaft, and align the timing marks of the
crankshaft timing pulley and oil pump body.
NOTICE:
Always turn the crankshaft clockwise.
(c) Check that the timing marks of the camshaft timing pul-
S02108 leys and No.3 timing belt cover are aligned.
If not, turn the crankshaft pulley 1 revolution (360

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo