Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota 4Runner 1996-2003 Approved SIL techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 024runne lu5vzfe oilpum inst
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download inst documenatation <<
Text preview - extract from the document
LU-15
LUBRICATION (5VZ-FE) - OIL PUMP
LU00P-03
INSTALLATION
1. INSTALL OIL PUMP
(a) Remove any old packing (FIPG) material and be careful
not to drop any oil on the contact surfaces of the oil pump
and cylinder block.
S Using a razor blade and gasket scraper, remove all
the old packing (FIPG) material from the gasket sur-
faces and sealing grooves.
S Thoroughly clean all components to remove all the
loose material.
S Using a non-residue solvent, clean both sealing
surfaces.
(b) Apply seal packing to the oil pump, as shown in the il-
Seal Width lustration.
A 2 - 3 mm
Seal packing: Part No. 08826-00080 or equivalent
A
S Install nozzle that has been cut out to a 2-3 mm
(0.08-0.12 in.) opening.
B HINT:
B Avoid applying an excessive amount to the surface.
S Parts must be assembled within 5 minutes of ap-
P20937 plication. Otherwise the material must be removed
and reapplied.
S Immediately remove nozzle from the tube and rein-
stall cap.
(c) Place a new O-ring into the groove of cylinder block.
New O-Ring
P20930
Mark (d) Install the oil pump to the crankshaft with the spline teeth
of the drive rotor engaged with the large teeth of the
crankshaft.
Key
P20971
2002 4RUNNER (RM887U)
Author : Date : 1022
LU-16
LUBRICATION (5VZ-FE) - OIL PUMP
A (e) Install the oil pump with the 8 bolts, and ground strap.
B
B Torque:
Bolt A: 20 N◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo