Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota 4Runner 1996-2003 Approved SIL techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 024runne pr psa14wd insp

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download insp documenatation <<

Text preview - extract from the document

                                                                                                           PR-9
                                 PROPELLER SHAFT       -   PROPELLER SHAFT ASSEMBLY (4WD)
                                                                                                           PR01B-02


                                               INSPECTION
                Matchmarks                     1.    REMOVE SLEEVE YOKE FROM PROPELLER SHAFT
                                               (a)   Place matchmarks on the sleeve yoke and shaft.
                                               (b)   Pull out the sleeve yoke from the shaft.
                                               (c)   Remove the dust cover from the shaft.



                                      PR0014



                                               2.     INSPECT PROPELLER SHAFT AND INTERMEDIATE
                                                      SHAFTS FOR DAMAGE OR RUNOUT
                                               Using a dial indicator, check the runout of shafts.
                                                      Maximum runout: 0.8 mm (0.031 in.)
                                               If the shaft runout exceeds the maximum, replace the shaft.




                                      Z04240



                                               3.     INSPECT SPIDER BEARINGS
                                               NOTICE:
                                               Be careful not to grip the propeller shaft tube too tightly in
                                               a vise as this will cause deformation.
                                               (a) Inspect the spider bearings for wear or damage.
                                               (b) Using a dial indicator, check the spider bearing axial play
                                                      by turning the yoke with holding the shaft tightly.
                                                      Bearing axial play: Maximum 0.05 mm (0.0020 in.)
                                      Z04241   If the bearing axial play exceeds the maximum, replace the spi-
                                               der bearing (w/o double cardan joint) / propeller shaft (w/ double
                                               cardan joint).




                                               4.    INSPECT WITH DOUBLE CARDAN JOINT PROPEL-
                                                     LER SHAFT
                                               HINT:
                                               Double cardan joint is used on 4WD rear propeller shafts.
                                               (a) Inspect the shaft for wear or damage.
                                               (b) Inspect the double cardan joint for wear or damage.
                             Double
                             Cardan            If any problem is found, replace the propeller shaft assembly.
                             Joint
                                      PR0149



2002 4RUNNER (RM887U)

                                                                 Author :             Date :               1164
PR-10
                        PROPELLER SHAFT   -   PROPELLER SHAFT ASSEMBLY (4WD)

                                5.    INSERT SLEEVE YOKE INTO PROPELLER SHAFT
                                (a)   Apply grease to the propeller shaft spline and sleeve yoke
                                      sliding surface.
                                      Grease:
                                      Molybdenum disulfide lithium base chassis grease,
                                      NLGI No.2
                                (b)   Install the dust cover to the shaft.
                                (c)   Align the matchmarks on the yoke and propeller shaft.
                                HINT:
                                When replacing the propeller shaft, install the new parts facing,
                                as shown in the following illustration.




                                                                                           F08177




2002 4RUNNER (RM887U)

                                                     Author :            Date :             1165

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo