Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota 4Runner 1996-2003 Approved SIL techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 024runne sa fdros repl

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download repl documenatation <<

Text preview - extract from the document

SA-24
                                SUSPENSION AND AXLE     -   FRONT DIFFERENTIAL REAR OIL SEAL
                                                                                                         SA057-03


                                                REPLACEMENT
                                                1.    REMOVE UNDER COVER
                                                2.    REMOVE FRONT PROPELLER SHAFT
                                                      (See page PR-8 )




                                                3.    REMOVE COMPANION FLANGE
                                 SST
                                                (a)   Using a chisel and hammer, unstake the nut.
                                                (b)   Using SST to hold the flange, remove the nut.
                                                      SST 09330-00021




                                       Z00638



                                                (c)   Using SST, remove the companion flange.
                         SST
                                                      SST 09950-30012 (09951-03010, 09953-03010,
                                                             09954-03010, 09955-03030, 09956-03020)




                                       R13369




                        SST                     4.    REMOVE OIL SEAL AND OIL SLINGER
                                                (a)   Using SST, remove the oil seal.
                                                      SST 09308-10010
                                                (b)   Remove the oil slinger.




                                       R13370



                          SST                   5.    REMOVE REAR BEARING AND BEARING SPACER
                                                (a)   Using SST, remove the rear bearing from the drive pinion.
                                                      SST 09556-22010
                                                (b)   Remove the bearing spacer.




                                       R13371



2002 4RUNNER (RM887U)

                                                                   Author :             Date :             1194
                                                                                                       SA-25
                                SUSPENSION AND AXLE     -   FRONT DIFFERENTIAL REAR OIL SEAL

                                                6.    INSTALL BEARING SPACER, REAR BEARING AND
                        SST
                                                      OIL SLINGER
                                                (a)   Install a new bearing spacer and place the rear bearing
                                                      and oil slinger.
                                                (b)   Using SST and the companion flange, install the rear
                                                      bearing, then remove the companion flange.
                                                      SST 09950-30012 (09951-03010, 09953-03010,
                                                               09954-03010, 09955-03030, 09956-03020)
                                       R13368



                                                7.    INSTALL NEW OIL SEAL
                          SST                   (a)   Coat a new oil seal lip with MP grease.
                                                (b)   Using SST and a hammer, install the oil seal.
                                                      SST 09554-22010
                                                      Oil seal drive in depth: 4.5 mm (0.177 in.)




                                       R13374



                                                8.    INSTALL COMPANION FLANGE
                                                (a)   Place the companion flange on the drive pinion.
                                                (b)   Coat the threads of a new nut with hypoid gear oil.
                                                (c)   Using SST to hold the flange, torque the nut.
                                                      SST 09330-00021
                  SST                                 Torque: 108 N

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo