Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota 4Runner 1996-2003 Approved SIL techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 024runne sa fds disa

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download disa documenatation <<

Text preview - extract from the document

SA-18
                            SUSPENSION AND AXLE    -   FRONT DRIVE SHAFT
                                                                                                      SA053-02


                                          DISASSEMBLY
                                          1.    CHECK DRIVE SHAFT
                                          (a)   Check to see that there is no play in the inboard and out-
                                                board joints.
                                          (b)   Check to see that the inboard joint slides smoothly in the
                                                thrust direction.
                                          (c)   Check to see that there is no significant play in the radial
                                                direction of the inboard joint.
                                 W01721
                                          (d)   Check the boot for damage.
                                          2.    REMOVE INBOARD JOINT BOOT CLAMPS
                                          (a)   Using a screwdriver, remove the 2 inboard joint boot
                                                clamps.
                                          (b)   Slide the inboard joint boot toward the outboard joint.




                                          3.    REMOVE INBOARD JOINT TULIP
                   Matchmarks
                                          (a)   Place matchmarks on the inboard joint tulip and drive
                                                shaft.
                                          (b)   Remove the inboard joint tulip from the drive shaft.




                                 R13342



                                          4.     REMOVE TRIPOD FROM DRIVE SHAFT
                                          (a) Using snap ring expander, remove the snap ring.
                                          (b) Place matchmarks on the shaft and tripod.
                                          (c) Using a brass bar and hammer, remove the tripod.
                                          NOTICE:
                                          Do not tap the roller.
                                          5.     REMOVE INBOARD AND OUTBOARD JOINT BOOTS
               Matchmarks                 (a) Remove the inboard joint boot and 2 clamps from the
                                 N00194          drive shaft.
                                          (b) Using a side cutter, cut the 2 outboard boot clamps.
                                          (c) Remove the outboard joint boot from the drive shaft.
                                          NOTICE:
                                          Do not disassemble the outboard joint.
                                          6.     REMOVE DUST COVER
                                          Using a screwdriver, remove the dust cover from the inboard
                                          joint tulip.




2002 4RUNNER (RM887U)

                                                             Author :             Date :                1188
                                                                                           SA-19
                        SUSPENSION AND AXLE   -   FRONT DRIVE SHAFT

                                      7.    REMOVE DUST SEAL
                                      Using a screwdriver and hammer remove the dust seal from the
                                      drive shaft.




                             W01722




2002 4RUNNER (RM887U)

                                                        Author :          Date :            1189

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo