Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota 4Runner 1996-2003 Approved SIL techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 024runne sa fwa insp

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download insp documenatation <<

Text preview - extract from the document

                                                                                                                               SA-5
                        SUSPENSION AND AXLE         -     FRONT WHEEL ALIGNMENT


 Front                                   FRONT WHEEL ALIGNMENT                                                                 SA04U-03


                                         INSPECTION
                                         1.       MEASURE VEHICLE HEIGHT
                                                  Vehicle height:
                                                  2WD:
                                                  Front              A - B: 72.2 mm (2.843 in.)
    B                       A
                                                  Rear               C - D: 52.0 mm (2.047 in.)
                                                  4WD:
                                                  Front              A - B: 69.9 mm (2.752 in.)
 Rear
                                                  Rear               C - D: 50.7 mm (1.996 in.)
                                         Measuring points:
                                         A: Ground clearance of spindle center
                                         B: Ground clearance of front adjusting cam bolt center
                                         C: Ground clearance of rear axle shaft center
                        C                D: Ground clearance of lower control arm front bushing
         D
                                         center
                                F02042
                                         NOTICE:
                                         Before inspecting the wheel alignment, adjust the vehicle
                                         height to the specification.
                                         If the vehicle height is not within the specification, try to adjust
                                         it by pushing down on or lifting the body.




                                         2.    INSTALL CAMBER-CASTER-KINGPIN GAUGE OR
                                               ONTO WHEEL ALIGNMENT TESTER
                                         Follow the specific instructions of the equipment manufacturer.
                                         3.    INSPECT CAMBER, CASTER AND STEERING AXIS
                                               INCLINATION
                                               2WD:
                                         Camber                                              -0 

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo