Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota 4Runner 1996-2003 Approved SIL techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 024runne sa ras insp
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download insp documenatation <<
Text preview - extract from the document
SA-82
SUSPENSION AND AXLE - REAR AXLE SHAFT
SA06B-02
INSPECTION
1. w/ ABS:
REMOVE BEARING RETAINER (DIFFERENTIAL SIDE)
AND ABS SPEED SENSOR ROTOR
(a) Attach 4 nuts to the serration bolts and remove the serra-
tion bolts from the backing plate using a hammer.
NOTICE:
Do not reuse the nuts previously removed from the vehicle.
R12297
(b) Grind the retainer and sensor rotor surfaces using a grind-
er, then chisel them out with a chisel.
(c) Attach washers and nuts to the 4 serration bolts, then
torque the nuts to install the serration bolts to the backing
plate.
(d) Remove the 4 nuts from the serration bolts.
2. REMOVE SNAP RING FROM AXLE SHAFT
Using a snap ring expander, remove the snap ring.
R12298
3. REMOVE REAR AXLE SHAFT FROM BACKING
SST PLATE
(a) Position SST on the backing plate with the 4 nuts.
SST 09521-2501 1
SA0528
(b) Using a press, remove the rear axle shaft with the bearing
retainer from the backing plate.
(c) Remove the SST.
SST SST 09521-2501 1
RA0177
4. INSPECT AXLE SHAFT
Maximum runout:
Shaft runout: 2.0 mm (0.079 in.)
Flange runout: 0.1 mm (0.004 in.)
If the rear axle shaft or flange are damaged or worn, or if runout
is greater than the maximum, replace the rear axle shaft.
R12254
2002 4RUNNER (RM887U)
Author : Date : 1252
SA-83
SUSPENSION AND AXLE - REAR AXLE SHAFT
5. REMOVE OUTER OIL SEAL
SST
Using SST, remove the oil seal.
SST 09308-00010
R12256
6. REPLACE REAR AXLE BEARING
SST
(a) Using SST, remove the bearing.
SST 09223-56010, 09950-60010 (09951-00560)
SST
SA0541
(b) Using SST, install a new bearing.
SST 09515-30010, 09950-60020 (09951-00890)
SST
SA0536
7. INSTALL NEW OUTER OIL SEAL
Using SST and a hammer, install a new oil seal.
SST 09950-60010 (09951-00610),
09950-70010 (09951-07150)
SST
SA0539
Socket Wrench
8. REPLACE BEARING CASE
(a) Remove the oil seal (outer side) and bearing.
(b) Install 4 nuts to the serration bolts.
(c) Using a hammer, remove the 4 serration bolts and re-
move the bearing case.
(d) Position the backing plate on a new bearing case and, us-
ing 2 socket wrenches, install the 4 serration bolts.
(e) Install a new bearing and oil seal (outer side).
SA0532
2002 4RUNNER (RM887U)
Author : Date : 1253
SA-84
SUSPENSION AND AXLE - REAR AXLE SHAFT
9. REPLACE OIL SEAL (INNER SIDE)
(a) Using SST, remove the oil seal.
SST 09308-00010
SST
W01741
(b) Using SST and a hammer, install a new oil seal.
SST 09950-60020 (09951-00710),
SST 09950-70010 (09951-07150)
(c) Apply MP grease to the oil seal lip.
W01742
10. INSTALL REAR AXLE SHAFT IN BACKING PLATE
(a) Apply MP grease to the oil seal lip.
Bearing Side (b) Install the backing plate and bearing retainer on the rear
axle shaft.
(c) Using SST and a press, install the rear axle shaft into the
backing plate.
SST SST 09316-60010 (09316-00051)
(d) Using snap ring pliers, install a new snap ring.
R12939
11. w/ ABS:
122.2 ◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo