Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota 4Runner 1996-2003 Approved SIL techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 024runne sf5vzfe thrbod ovi
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download ovi documenatation <<
Text preview - extract from the document
SF-30
SFI (5VZ-FE) - THROTTLE BODY
THROTTLE BODY SF029-04
ON-VEHICLE INSPECTION
1. INSPECT SYSTEM OPERATION
(a) Check that the throttle linkage moves smoothly.
B13428
(b) Inspect the throttle control motor for operating sound.
(1) Turn the ignition switch ON.
(2) When turning the accelerator pedal position sensor
lever, check the running sound of the motor. Also,
check that there is no friction sound.
If operation is not as specified, check the throttle control motor
(See step 2), wiring and ECM.
B13429
TOYOTA Hand-Held Tester (c) Inspect the accelerator pedal position sensor.
(1) Connect the TOYOTA hand- held tester to the
DLC3.
(2) Check that the MIL does not light up.
(3) When turning the accelerator pedal position sensor
lever to the full- open position, check that the
DLC3
throttle valve opening percentage (THROTTLE
POS) of the CURRENT DATA showns the standard
S01974 value.
Standard throttle valve opening percentage:
60 % or more
If operation is not as specified, check that the accelerator pedal
position sensor (See step 5), wiring and ECM.
If you have no TOYOTA hand-held tester, measure voltage be-
E2 VTA
ECM tween terminals VTA and E2 of the ECM connector.
(d) Inspect the idle speed.
(1) Start the engine and check that the MIL does not
Voltmeter light up.
(2) Allow the engine to warm up to normal operating
temperature.
(3) Turn the A/C compressor ON to OFF, and check the
B13431 idle speed.
Idle speed (Transmission in neutral): 700 ◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo