Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota 4Runner 1996-2003 Approved SIL techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 024runne sr ntsc insp
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download insp documenatation <<
Text preview - extract from the document
SR-17
STEERING - NON-TIL T STEERING COLUMN
SR022-03
INSPECTION
NOTICE:
When using a vise, do not overtighten it.
1. INSPECT STEERING LOCK OPERATION
Check that the steering lock mechanism operates properly.
W01895
2. IF NECESSARY, REPLACE KEY CYLINDER
(a) Place the ignition key at the ACC position.
(b) Using a screwdriver, push down the stop pin of the key cyl-
inder, and pull out the key cylinder.
(c) Install a new key cylinder.
HINT:
Make sure the key is at the ACC position.
3. INSPECT IGNITION SWITCH (See page BE-12 )
Key Cylinder 4. IF NECESSARY, REPLACE IGNITION SWITCH
W01896
(a) Remove the 2 screws and ignition switch.
(b) Install a new ignition switch with the 2 screws.
5. INSPECT KEY UNLOCK WARNING SWITCH
(See page BE-12 )
6. INSPECT KEY INTERLOCK SOLENOID
(See page AT-16 )
7. IF NECESSARY, REPLACE KEY UNLOCK WARNING
SWITCH WITH KEY INTERLOCK SOLENOID
(a) Remove the 4 screws and key unlock warning switch with
key interlock solenoid.
(b) Install a new key unlock warning switch and key interlock
solenoid with the 4 screws.
8. IF NECESSARY, REPLACE BUSHING
(a) Using a screwdriver, loosen the 3 projections of the bush-
Bushing ing, and remove the bushing from the column tube.
F01199
2002 4RUNNER (RM887U)
Author : Date : 1375
SR-18
STEERING - NON-TIL T STEERING COLUMN
(b) Coat the inside of a new bushing with molybdenum disul-
fide lithium base grease.
(c) Align the projections on the bushing with the holes in the
column tube, then install the bushing until the projections
are firmly engaged in the holes.
F01200
9. INSPECT BEARING
Non-tilt steering column :
(a) Check the bearing rotation condition and check for abnor-
mal noise.
Bearing If the bearing is worn or damaged, replace the column tube/col-
umn upper tube.
(b) Coat the bearing with molybdenum disulfide lithium base
grease.
Tilt steering column :
Bearing
W01892
10. Tilt steering column:
INSPECT BEARING
(a) Check the bearing rotation condition of the main shaft as-
sembly and check for abnormal noise.
If necessary, replace bearing.
(b) Coat the bearing with molybdenum disulfide lithium base
grease.
Bearing 11. INSPECT TRANSPONDER KEY COIL
W00088 (See page BE-172 )
12. IF NECESSARY, REPLACE TRANSPONDER KEY
COIL
13. IF NECESSARY, REPLACE TRANSPONDER KEY AM-
PLIFIER
(a) Remove the screw and transponder key amplifier.
(b) Install a new transponder key amplifier with the screw.
2002 4RUNNER (RM887U)
Author : Date : 1376
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo