Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota 4Runner 1996-2003 Approved SIL techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 024runne sr psg reas

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document
reas

>> Download reas documenatation <<

Text preview - extract from the document

SR-54
STEERING - POWER STEERING GEAR
SR02R-05

REASSEMBLY
NOTICE:
When using a vise, do not overtighten it.
1. COAT PARTS INDICATED BY ARROWS WITH POWER
STEERING FLUID OR MOLYBDENUM DISULFIDE
LITHIUM BASE GREASE (See page SR-42 )

2. INSTALL SPACER AND OIL SEAL
(a) Coat a new oil seal lip with power steering fluid.
SST
(b) Using SST, press in the oil seal and spacer.
SST 09951- 60010 (09951- 00330, 09951- 00490,
09952-06010), 09950-70010 (09951-07360)
Oil Seal NOTICE:
Spacer S Make sure that the oil seal is installed facing in the
correct direction.
SST W03670 S Take care that the oil seal does not get reversed as
you install it.
3. INSTALL STEERING RACK
(a) Install SST to the rack.
SST 09631-00350
HINT:
If necessary, scrape the burrs off the rack teeth end and bur-
nish.
(b) Coat SST with power steering fluid.
(c) Install the rack into the rack housing.
Rack Teeth End
(d) Remove the SST.
SST 09631-00350

SST

W02101

2002 4RUNNER (RM887U)

Author : Date : 1412
SR-55
STEERING - POWER STEERING GEAR

4. INSTALL OIL SEAL
SST (a) Install SST to the steering rack opposite end.
SST 09631-00350
(b) Coat SST with power steering fluid.
(c) Coat a new oil seal lip with power steering fluid.
(d) Install the oil seal by pushing it onto the SST without tilt-
ing.
NOTICE:
R11307 Make sure that the oil seal is installed facing in the correct
direction.
(e) Remove the SST.
SST 09631-00350

5. INSTALL CYLINDER END STOPPER
(a) Coat a new O-ring with power steering fluid, and install
it to the cylinder end stopper.
SST (b) Using SST, install the cylinder end stopper.
SST 09922-10010
Fulcrum Length Torque: 58 N

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo