Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota 4Runner 1996-2003 Approved SIL techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 024runne sr psvp reas

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download reas documenatation <<

Text preview - extract from the document

                                                                                                        SR-39
                                              STEERING   -   POWER STEERING VANE PUMP
                                                                                                         SR02L-03


                                               REASSEMBLY
                                               NOTICE:
                                               When using a vise, do not overtighten it.
                                               1.   COAT PARTS INDICATED BY ARROWS WITH POWER
                                                    STEERING FLUID (See page SR-31 )
                                               2.   INSTALL STRAIGHT PINS
                                               Using a plastic hammer, tap in 2 new straight pins to the front
                                               housing.
                                               NOTICE:
                                               Be careful not to damage the straight pins.
                                               3.   INSTALL VANE PUMP SHAFT




                                               4.    INSTALL CAM RING
                                               Align the holes of the cam ring and 2 straight pins, and install
                                               the cam ring with the inscribed mark facing outward.




   Inscribed Mark                    R12188



                                               5.    INSTALL VANE PUMP ROTOR
                                               (a)   Install the vane pump rotor with the inscribed mark facing
                                                     outward.
                                               (b)   Install a new snap ring to the vane pump shaft.




                    Inscribed Mark
                                     R12189




             Round End
                                               6.     INSTALL VANE PLATES
                                               Install the 10 vane plates with the round end facing outward.




                                     R12190



2002 4RUNNER (RM887U)

                                                                  Author :              Date :           1397
SR-40
                                 STEERING   -   POWER STEERING VANE PUMP

                                  7.     INSTALL GASKET
                                  Install a new gasket on the front housing.
                                  NOTICE:
                                  Make sure that the gasket is installed facing in the correct
                                  direction.
                                  8.     INSTALL SIDE PLATE
                                  Align the holes of the side plate and 2 straight pins, and install
                                  the side plate.
                        R12191



                                  9.     INSTALL WAVE WASHER
                                  Install the wave washer so that its protrusions fit into the slots
                                  in the side plate.
                                  10. INSTALL REAR HOUSING
                                  (a) Coat 2 new O-rings with power steering fluid and install
                                         them to the housing.
                                  (b) Install the rear housing with the 2 bolts.
                                         Torque: 24 N

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo