Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Celica 1988-1989.1993-1994.2000 Approved Toyota Celica 1989 steering gear power

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
steering gear power


>> Download steering gear power documenatation <<

Text preview - extract from the document
                                                           STEERING GEAR - POWER

                                                                      1988 Toyota Celica




                1988 STEERING
                Toyota - Power Steering & Linkage - Rack & Pinion

                Celica, Celica 4WD (All-Trac)

       DESCRIPTION
         System consists of a frame mounted rack and pinion assembly,
a flow control valve, hydraulic pump and high pressure hoses. Flow
control valve regulates hydraulic pressure in proportion to steering
effort.
         The power steering pump is a belt-driven vane-type. Pump
components include an engine-driven eccentric rotor with vane plates,
an eccentric cam ring, and a flow control valve to regulate amount of
oil flow and maximum oil pressure.

       LUBRICATION

        FLUID TYPE
                Fluid type is Dexron II ATF.

        SYSTEM BLEEDING
         1) Raise and support vehicle. Fill fluid to proper level in
reservoir. Turn wheels fully in both directions. Recheck fluid level.
Start engine and let idle. Turn steering from lock-to-lock 2 or 3
times. Lower vehicle. Run engine at 1000 RPM or less.
         2) Turn wheel from lock-to-lock 2 or 3 times. Center
steering wheel. If fluid level does not rise and no foaming of fluid
is evident, bleeding is complete. If level rises more than .20" (5.0
mm), or if foaming is evident, repeat procedure until air is released.

       ADJUSTMENTS

        BELT TENSION
         Using a belt tension gauge, adjust belt tension. See BELT
TENSION SPECIFICATIONS table.

BELT TENSION SPECIFICATIONS TABLE



◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo