Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Celica 1988-1989.1993-1994.2000 Approved Toyota Celica 1994 heater system

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download heater system documenatation <<

Text preview - extract from the document

                                                                  HEATER SYSTEM

                                                                    1994 Toyota Celica




                1994 Heater System

                Celica

       DESCRIPTION
         Major components of the heater system are a heater core,
control panel, blower motor, water valve, hoses, control cables
(electric servomotors on some models), and air ducts.

WARNING: To avoid injury from accidental air bag deployment, read and
         carefully follow all SERVICE PRECAUTIONS and DISABLING &
         ACTIVATING AIR BAG SYSTEM procedures in appropriate
         AIR BAG RESTRAINT SYSTEM article in ACCESSORIES/SAFETY
         EQUIPMENT section.

CAUTION: When battery is disconnected, radio will go into anti-theft
         protection mode. Obtain radio anti-theft protection code
         from owner prior to servicing vehicle.

       OPERATION

        BLOWER SWITCH
         Switch controls blower motor speed through blower resistor.
Switch is operated by control lever, knob, or push button.

        CONTROL PANEL
         Lever-Controlled Models
         Temperature and mode levers are connected by cable to heater
coolant valve and air doors. All models have a fresh/recirculation
lever to provide choice of outside air or recirculated inside air.

         Push Button-Controlled Models
         Air inlet (fresh/recirculation), mode control, and air mix
are controlled by servomotors. Temperature selection is accomplished
by a slide lever or knob.

        HEATER RELAY
         A heater (or main) relay controls current through system.
See WIRING DIAGRAM. For location of heater relay, see
HEATER RELAY LOCATION table.

HEATER RELAY LOCATION TABLE
 

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo