Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Celica 1988-1989.1993-1994.2000 Approved Toyota Celica 1994 instrument panel

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download instrument panel documenatation <<

Text preview - extract from the document

                                      INSTRUMENT PANEL

                                        1994 Toyota Celica




         1994 ACCESSORIES & EQUIPMENT
         Toyota Motor Sales, U.S.A., Inc. - Instrument Panel

         Celica

         * PLEASE READ THIS FIRST *

WARNING: Vehicles are equipped with a driver-side air bag; use extreme
         caution while working around steering column. To disable air
         bag system, ensure ignition switch is in LOCK position and
         negative battery cable is disconnected and shielded for at
         least 90 seconds before attempting any repair. DO NOT apply
         electrical power to any instrument panel connector without
         disconnecting air bag control unit. Information labels are
         attached to air bag components. Follow all notices on labels.
         Use only DVOM (volt/ohmmeter) with minimum of 10-k/ohm
         impedance to check ANY circuit.

    DESCRIPTION & OPERATION

    GAUGES
         Standard instrument clusters contain fuel and temperature
gauges with telltale warning lights. Some optional instrument panels
are equipped with a tachometer, oil pressure gauge and voltmeter.
Gauge internal operating components use either a 2-terminal bimetallic
strip type, or a 3-terminal coil type. The 2-terminal type gauges are
generally used on clusters without tachometers.

    SWITCHES
         All models contain hazard warning switch and cruise control
main ON/OFF switch on instrument panel. All models use a combination
switch for headlight, turn signal, wiper/washer, and cruise control
switches. Combination switch is mounted on steering column. For
testing and/or removal and installation procedures for combination
switch components, see the STEERING COLUMN SWITCHES article in the
ACCESSORIES/SAFETY EQUIPMENT section.

    TESTING - GAUGES

    FUEL GAUGE & WARNING LIGHT
         Fuel Gauge & Wiring Harness Operational Test
         1) Unplug fuel tank sending unit connector. Turn ignition on.
If fuel gauge indicates EMPTY, go to next step. If fuel gauge does not
indicate EMPTY, repair short circuit in wiring harness. See wiring
diagram in WIRING DIAGRAMS.
         2) Connect a 12-volt, 3.4-watt test light between appropriate
terminals of sending unit wiring harness connector. See FUEL GAUGE &
HARNESS TEST table. See Fig. 1.
         3) With ignition on, test light should flash and gauge needle
should move toward FULL. If test light does not flash and gauge needle
does not move, check wiring harness for open circuit. Repair or
replace as necessary. If wiring harness checks good, replace fuel
gauge.

FUEL GAUGE & HARNESS TEST TABLE
                                 Fuel Sending Unit Resistance Test
                                                            FUEL SENDING UNIT TESTS
          Courtesy of Toyota Motor Sales, U.S.A., Inc.
          Fig. 1: Fuel Sending Unit Harness Connector Terminals
                                                                                                                     
 

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo