Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Celica 1988-1989.1993-1994.2000 Approved Toyota Celica 1994 power windows

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download power windows documenatation <<

Text preview - extract from the document

                                    POWER WINDOWS

                                      1994 Toyota Celica




         1994 ACCESSORIES & EQUIPMENT
         Toyota Motor Sales, U.S.A., Inc. - Power Windows

         Celica

    DESCRIPTION & OPERATION
         System components consist of a power window relay, power
window switches and power window motors for each door. With ignition
switch in ON position, battery voltage is supplied through power
window relay to power window switches. Power window switch supplies
power and ground for power window motors.
         Driver's side power window switch offers one-touch operation
of driver's side window. Driver's side power window switch also
includes a lock-out feature to prevent passengers from operating any
of the other power window switches.

    TROUBLE SHOOTING
         All Windows Inoperative & Lock-Out Is Inoperative
         Check for defective fuse (ALT, AM1, DOOR, GAUGE, POWER),
ignition switch, door lock control relay, driver's side power window
switch or wiring circuits.

         All Windows Inoperative & Lock-Out Operates Normal
         Check for defective fuse (GAUGE, POWER), ignition switch,
door lock control relay, driver's side power window switch or power
main relay.

        Lock Switch Inoperative
        Check driver's side power window lock switch.

        Window Lock Illumination Does Not Operate
        Check driver's side power window switch.

        One-Touch Feature Is Inoperative
        Check driver's side power window switch.

         One Window Does Not Operate
         Check driver's side power window switch for appropriate
window, power window switch, power window motor and wiring circuits
for appropriate window.

NOTE:   For door lock control relay testing, see DOOR LOCKS - POWER
        article. For ignition switch testing, see the
        STEERING COLUMN SWITCHES article. Both articles located in
        the ACCESSORIES/SAFETY EQUIPMENT section.

    TESTING

    POWER WINDOW SWITCH ILLUMINATION TEST (DRIVER'S SIDE SWITCH)
NOTE:   Illumination test is for all switches at driver's side power
        window switch.

         1) Using a 12-volt battery, connect jumper wire from positive
battery terminal to driver's side power window switch connector
terminal No. 6. See Fig. 1. Connect jumper wire from negative battery
terminal to connector terminal No. 3. Ensure power window switches
illuminate.
         2) Put power window lock switch in lock position. Ensure
passenger side power window switch does not illuminate. If
illumination is not as described, replace driver's side power window
switch.

        POWER WINDOW SYSTEM CURRENT TEST
         1) Disconnect connector from driver's side power window
switch. Connect positive lead of ammeter to driver's side power window
switch connector (harness side) terminal No. 5.
         2) Connect ammeter negative lead to negative terminal of 12-
volt battery. Connect jumper wire from positive battery terminal to
driver's side power window switch connector terminal No. 1. See
Fig. 1.
         3) While lowering driver's side window, current should be
about 7 amperes. When window operation is stopped, current should
increase to about 14.5 amperes or more. If current is as described,
replace driver's side power window switch. If current is not as
described, check and repair appropriate circuit.

        POWER WINDOW SWITCH CONTINUITY TEST (DRIVER'S SIDE SWITCH)
         Using an ohmmeter, check continuity between specified
terminals with driver's side power window switch in specified
position. See POWER WINDOW SWITCH CONTINUITY TEST (DRIVER'S SIDE)
table. See Fig. 1. If continuity does not exist at specified
terminals, replace power window switch.

POWER WINDOW SWITCH CONTINUITY TEST TABLE (DRIVER'S SIDE)
 

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo