Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Celica 1988-1989.1993-1994.2000 Approved Toyota Celica 1993 HEATER_S

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
HEATER_S


>> Download HEATER_S documenatation <<

Text preview - extract from the document
                                                                   HEATER SYSTEM

                                                                      1993 Toyota Celica




                1993 Heater Systems

                Celica

       DESCRIPTION
         Heater assembly consists of heater core, control panel,
blower motor, control cables (electric servomotors on push button-
controlled models) and air ducts. All components are located under
instrument panel.

WARNING: To avoid injury from accidental air bag deployment, read and
         carefully follow all SERVICE PRECAUTIONS and DISABLING &
         ACTIVATING AIR BAG SYSTEM procedures in appropriate
         AIR BAG RESTRAINT SYSTEM article in ACCESSORIES & ELECTRICAL
         section.

CAUTION: When battery is disconnected, radio will go into anti-theft
         protection mode. Obtain radio anti-theft protection code
         from owner prior to servicing vehicle.

       OPERATION

        BLOWER SWITCH
         Switch controls blower motor speed through blower resistor.
Switch is operated by control lever, dial knob or push button.

        CONTROL PANEL
         Lever-Controlled Models
         Temperature and mode levers are cable-connected to heater
coolant valve and air doors. All models have a fresh/recirculation
lever to provide choice of outside air entry or inside air
recirculation.

         Push Button-Controlled Models
         Air inlet (fresh/recirculation), mode control and air mix are
controlled by electric servomotors. Temperature selection is
controlled by slide lever or rotating dial knob.

        HEATER RELAY
         A heater (or main) relay in heater circuit controls current
flow through system. See WIRING DIAGRAM. For location of heater relay,
see HEATER RELAY LOCATION table.

HEATER RELAY LOCATION TABLE



◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo