Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Celica 1988-1989.1993-1994.2000 Approved Toyota Celica 1993 RIDING_H

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
RIDING_H


>> Download RIDING_H documenatation <<

Text preview - extract from the document
                                                         RIDING HEIGHT ADJUSTMENT

                                                                      1993 Toyota Celica




                1993 WHEEL ALIGNMENT
                Toyota Riding Height Adjustment

                Celica

        RIDING HEIGHT ADJUSTMENT
         Before adjusting alignment, measure riding height. Riding
height must be measured with vehicle on level floor and tires properly
inflated. Bounce vehicle several times to allow suspension to settle.
         Visually inspect vehicle for signs of abnormal height from
front to rear or side to side. Check passenger and luggage
compartments for extra heavy items, and remove them if present. If
riding height is not within specification, inspect and repair or
replace suspension components. See RIDING HEIGHT SPECIFICATIONS table.

        RIDING HEIGHT MEASUREMENT POINTS
         Celica (FWD)
         Measure front riding height from ground to center of lower
arm mounting bolt/nut. Measure rear riding height from ground to
center of forward strut rod mounting bolt. Strut rod is parallel to
side body panel.

         Celica (All-Trac)
         Measure front riding height from ground to center of lower
arm mounting bolt/nut. Measure rear riding height from ground to
center of body side No. 2 suspension arm mounting bolt (behind axle).

RIDING HEIGHT SPECIFICATIONS TABLE



◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo