Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Celica 1988-1989.1993-1994.2000 Approved Toyota Celica 1993 STEERIN2

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
STEERIN2


>> Download STEERIN2 documenatation <<

Text preview - extract from the document
                                                       STEERING COLUMN SWITCHES

                                                                      1993 Toyota Celica




                1993 ACCESSORIES/SAFETY EQUIPMENT
                Toyota Steering Column Switches

                Celica

       DESCRIPTION

        * PLEASE READ THIS FIRST *
WARNING: Celica is equipped with a driver-side air bag. Before
         servicing steering column, disable air bag system to prevent
         air bag deployment. To disable air bag system, turn ignition
         switch to LOCK position. Disconnect negative battery cable.
         Wait at least 90 seconds to allow back-up power supply to
         discharge. For more information, see AIR BAG RESTRAINT SYSTEM
         article in the ACCESSORIES/SAFETY EQUIPMENT section.

       TESTING
NOTE:           This article TABLE contains information on headlight and
                taillight system relays because they are part of exterior
                lighting system.

        COMBINATION SWITCH
NOTE:           Combination switch includes switches for headlights, turn
                signals and windshield wipers. For testing, see appropriate
                component procedure.




Fig. 1: Combination Switch Connector Terminal ID
Courtesy of Toyota Motor Sales, U.S.A. Inc.

        HEADLIGHT, DIMMER & PASSING SWITCHES
         With headlight switch in specified position, check continuity
between specified terminals of combination switch connector. See
HEADLIGHT SWITCH CONTINUITY TEST table and/or
DIMMER & PASSING SWITCHES CONTINUITY TEST table. See Fig. 1. If
continuity is not as specified, replace headlight switch or turn
signal/dimmer switch as necessary.

HEADLIGHT SWITCH CONTINUITY TEST TABLE
 



◦ Jabse Service Manual Search 2024 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo