Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Echo 2000-2002 Approved techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 02echorm ac dribel ovi
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download ovi documenatation <<
Text preview - extract from the document
AC-16
AIR CONDITIONING - DRIVE BELT
DRIVE BELT AC2JT-01
ON-VEHICLE INSPECTION
1. INSPECT DRIVE BELT'S INSTALLATION CONDITION
Check that the drive belt fits properly in the ribbed grooves.
Correct Wrong
CH0087
2. INSPECT DRIVE BELT DEFLECTION
(a) Using a belt tension gauge, apply load of
Alternator 98 N (10 kgf, 22 lbf).
(b) Measure drive belt deflection.
Water Pump
Drive belt deflection:
Crank Pulley New belt: 7.0 - 8.5 mm (0.28 - 0.33 in.)
Compressor
Used belt: 11.0 - 13.0 mm (0.43 - 0.51 in.)
: Measure point for belt looseness HINT:
and tension I13919 S "New belt" refers to a belt which has been used less than
5 minutes on a running engine.
S "Used belt" refers to a belt which has been used on a run-
ning engine for 5 minutes or more.
S After installing the drive belt, check that it fits properly in
the ribbed grooves.
3. INSPECT DRIVE BELT TENSION (Reference)
Using a belt tension gauge, check the drive belt tension.
Drive belt tension:
New belt: 490 - 690 N (50 - 70 kgf)
Used belt: 340 - 440 N (35 - 45 kgf)
I02495
2002 ECHO (RM884U)
Author : Date : 1463
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo