Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Echo 2000-2002 Approved techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 02echorm bo qwg inst
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download inst documenatation <<Text preview - extract from the documentBO-60
BODY - QUARTER WINDOW GLASS
BO2UD-01
Body
INSTALLATION
Adhesive 1. CLEAN AND SHAPE CONTACT SURFACE OF BODY
PANEL
(a) Using a knife, cut away any rough areas on the body.
HINT:
Leave as much of the adhesive on the body as possible.
(b) Clean the cutting surface of the adhesive with a piece of
shop rag saturated in cleaner.
BO4420
HINT:
Even if all the adhesive has been removed, clean the body.
2. CLEAN REMOVED GLASS
(a) Remove the damaged spacers and pins.
(b) Using a scraper, remove the adhesive sticking to the
glass.
(c) Clean the glass with a cleaner.
NOTICE:
S Do not touch the glass after cleaning it.
S Be careful not to damage the glass.
BO5231
3. INSTALL NEW SPACERS AND PINS
(a) Once place new pins and spacers to the body.
(b) Peel the release sheets from adhesive tapes.
Spacer (c) Position the glass in correct position.
(d) Remove the glass with the spacers and pins.
Pin
H12405
4. CLEAN CONTACT SURFACE OF GLASS
Using a cleaner, clean the contact surface which is black-col-
ored area around the entire glass rim.
NOTICE:
Do not touch the glass face after cleaning it.
BO4421
2002 ECHO (RM884U)
Author : Date : 1380
BO-61
BODY - QUARTER WINDOW GLASS
5. COAT CONTACT SURFACE OF BODY WITH PRIMER
Primer M Primer M
"M"
Using a brush, coat Primer M to the exposed part of body on the
vehicle side.
NOTICE:
S Let the primer coating dry for 3 minutes or more.
S Do not coat Primer M to the adhesive.
Primer M
S Do not keep any of the opened Primer M for later use.
Adhesive H02865
6. COAT CONTACT SURFACE OF NEW GLASS WITH
Primer G PRIMER "G"
(a) Using a brush or sponge, coat the edge of the glass and
the contact surface with Primer G as shown in the illustra-
tion.
(b) When the primer is coated wrongly to the area other than
the specified, wipe it off with a clean shop rag before the
primer dries.
NOTICE:
S Let the primer coating dry for 3 minutes or more.
7 mm (0.28 in.) 14 mm (0.55 in.) S Do not keep any of the opened Primer G for later use.
7. APPLY ADHESIVE
(a) Cut off the tip of the cartridge nozzle.
Part No. 08850-00801 or equivalent
HINT:
After cutting off the tip, use all adhesive within the time de-
scribed in the table below.
Primer G Temperature Tackfree time
H12406
35
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo