Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Echo 2000-2002 Approved techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 02echorm di eg cip0340
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download cip0340 documenatation <<Text preview - extract from the document DI-75
DIAGNOSTICS - ENGINE
DI6VB-01
DTC P0340 Camshaft Position Sensor Circuit
Malfunction
CIRCUIT DESCRIPTION
Camshaft position sensor (G22 signal) consist of signal plate and pick up coil.
The G22 signal plate has one tooth on its outer circumference and is mounted on the exhaust camshaft.
When the camshafts rotate, the protrusion on the signal plate and the air gap on the pick up coil change,
causing fluctuations in the magnetic field and generating an electromotive force in the pick up coil.
The NE signal plate has 34 teeth and is mounted on the crankshaft. The NE signal sensor generates 34
signals for every engine revolution. The ECM detects the standard crankshaft angle based on the G22 sig-
nals and the actual crankshaft angle and the engine speed by the NE signals.
DTC No. DTC Detecting Condition Trouble Area
No camshaft position sensor signal to ECM during cranking. S Open or short in camshaft position sensor circuit
(2 trip detection logic) S Camshaft position sensor
osition
P0340
No camshaft position sensor signal to ECM with engine speed S Camshaft timing pulley
600 rpm or more S ECM
WIRING DIAGRAM
Refer to DTC P0335 (Crankshaft Position Sensor "A" Circuit Malfunction) on page DI-72 for the WIRING
DIAGRAM.
INSPECTION PROCEDURE
HINT:
Read freeze frame data using TOYOTA hand-held tester or OBD II scan tool. Because freeze frame records
the engine conditions when the malfunction is detected, when troubleshooting it is useful for determining
whether the vehicle was running or stopped, the engine warmed up or not, the air-fuel ratio lean or rich, etc.
at the time of the malfunction.
1 Check resistance of camshaft position sensor (Signal generator)
(See page IG-1 ).
Reference: INSPECTION USING OSCILLOSCOPE
Refer to DTC P0335 (Crankshaft Position Sensor "A" Circuit Malfunction) on page DI-72 for the INSPEC-
TION USING OSCILLOSCOPE.
NG Replace camshaft position sensor.
OK
2002 ECHO (RM884U)
Author : Date : 245
DI-76
DIAGNOSTICS - ENGINE
2 Check for open and short in harness and connector between ECM and camshaft
position sensor (See page IN-29 ).
NG Repair or replace harness or connector.
OK
3 Inspect sensor installation and tooth of camshaft timing pulley
(See page EM-15 ).
NG Tighten the sensor.
Replace camshaft timing pulley.
OK
Check and replace ECM (See page IN-29 ).
2002 ECHO (RM884U)
Author : Date : 246
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo