Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Echo 2000-2002 Approved techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 02echorm di rs cib01021
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download cib01021 documenatation <<
Text preview - extract from the document
DI-263
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
DI4L2-12
DTC B0102/11 Short in D Squib Circuit (to Ground)
CIRCUIT DESCRIPTION
The D squib circuit consists of the airbag sensor assembly, spiral cable and steering wheel pad.
It causes the SRS to deploy when the SRS deployment conditions are satisfied.
For details of the function of each component, see OPERATION on page RS-2 .
DTC B0102/11 is recorded when a ground short is detected in the D squib circuit.
DTC No. DTC Detecting Condition Trouble Area
S Short circuit in D squib wire harness (to ground) S Steering wheel pad (D squib)
S D squib malfunction S Spiral cable
B0102/11
S Spiral cable malfunction S Airbag sensor assembly
S Airbag sensor assembly malfunction S Wire harness
WIRING DIAGRAM
See page DI-254 .
INSPECTION PROCEDURE
1 Prepare for inspection (See step 1 on page DI-390 ).
2 Check D squib circuit.
CHECK:
For the connector (on the spiral cable side) between the spiral
D Squib Airbag cable and the steering wheel pad, measure the resistance be-
Spiral
Cable
Sensor tween D+ and body ground.
Assembly
OK:
Resistance: 1 M or Higher
D+
(-) (+)
H01001
NG Go to step 5.
H02145 H02198
OK
2002 ECHO (RM884U)
Author : Date : 433
DI-264
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
3 Check airbag sensor assembly.
PREPARATION:
(a) Connect the connector to the airbag sensor assembly.
Airbag (b) Using a service wire, connect D+ and D- of the connector
Spiral (on the spiral cable side) between the spiral cable and the
Sensor
Cable
Assembly steering wheel pad.
D Squib
(c) Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
CHECK:
D- D+ ON (a) Turn the ignition switch to ON, and wait at least for 20 se-
conds.
(b) Clear DTC stored in memory (See step 5 on page
DI-239 ).
DLC3 DTC B0102/11 (c) Turn the ignition switch to LOCK, and wait at least for 20
seconds.
(d) Turn the ignition switch to ON, and wait at least for 20 se-
conds.
(e) Check DTC (See page DI-239 ).
CG Tc
H01002 OK:
H02144 AB0118
H10600 W02042 H10605 DTC B0102/11 is not output.
HINT:
Codes other than code B0102/11 may be output at this time, but
they are not relevant to this check.
NG Replace airbag sensor assembly.
OK
2002 ECHO (RM884U)
Author : Date : 434
DI-265
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
4 Check D squib.
PREPARATION:
(a) Turn the ignition switch to LOCK.
Airbag
(b) Disconnect negative (-) terminal cable from the battery,
Spiral Sensor and wait at least for 90 seconds.
Cable Assembly (c) Connect the steering wheel pad connector.
D Squib
(d) Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
ON CHECK:
(a) Turn the ignition switch to ON, and wait at least for 20 se-
conds.
(b) Clear DTC stored in memory (See step 5 on page
DLC3 DTC B0102/11 DI-239 ).
(c) Turn the ignition switch to LOCK, and wait at least for 20
seconds.
(d) Turn the ignition switch to ON, and wait at least for 20 se-
conds.
CG Tc
(e) Check DTC (See page DI-239 ).
H01003 OK:
AB0119
H10600 W02042 H10606 DTC B0102/11 is not output.
HINT:
Codes other than code B0102/11 may be output at this time, but
they are not relevant to this check.
NG Replace steering wheel pad.
OK
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check. If the malfunctioning part can not be
detected by the simulation method, replace all SRS components including the wire harness.
2002 ECHO (RM884U)
Author : Date : 435
DI-266
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
5 Check spiral cable.
PREPARATION:
Disconnect the connector between the airbag sensor assembly
D Squib Airbag and the spiral cable.
Spiral
Sensor CHECK:
Cable
Assembly For the connector (on the spiral cable side) between the steer-
ing wheel pad and the spiral cable, measure the resistance be-
tween D+ and body ground.
OK:
Resistance: 1 M or Higher
D+
(-) (+)
H01000
H02200
NG Repair or replace spiral cable.
H02145
OK
6 Check harness between airbag sensor assembly and spiral cable.
CHECK:
For the connector (on the spiral cable side) between the spiral
cable and the airbag sensor assembly, measure the resistance
Spiral Airbag between D+ and body ground.
Sensor
Cable Assembly
OK:
D Squib Resistance: 1 M or Higher
D+
(-) (+)
H01004
H02145 H10607
NG Repair or replace harness between airbag sen-
sor assembly and spiral cable.
OK
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check. If the malfunctioning part can not be
detected by the simulation method, replace all SRS components including the wire harness.
2002 ECHO (RM884U)
Author : Date : 436
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo