Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Echo 2000-2002 Approved techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 02echorm di rs cib01114
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download cib01114 documenatation <<
Text preview - extract from the document
DI-288
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
DI1ND-14
DTC B0111/44 Open in Side Squib (RH) Circuit
CIRCUIT DESCRIPTION
The side squib (RH) circuit consists of the airbag sensor assembly and side airbag assembly (RH).
It causes the SRS to deploy when the SRS deployment conditions are satisfied.
For details of the function of each component, see OPERATION on page RS-2 .
DTC B0111/44 is recorded when an open is detected in the side squib (RH) circuit.
DTC No. DTC Detecting Condition Trouble Area
S Open circuit in SFR+ wire harness or SFR- wire harness
S Side airbag assembly (RH)
of squib
B0111/44 S Airbag sensor assembly
S Side squib (RH) malfunction
S Wire harness
S Airbag sensor assembly malfunction
WIRING DIAGRAM
See page DI-284 .
INSPECTION PROCEDURE
1 Prepare for inspection (See step 1 on page DI-390 ).
2 Check side squib (RH) circuit.
CHECK:
For the connector (on the side airbag assembly side) between
Airbag the side airbag assembly (RH) and the airbag sensor assembly,
Squib (RH) Sensor
measure the resistance between SFR+ and SFR-.
Assembly
OK:
Resistance: Below 1
SFR- SFR+
(-) (+) NG Repair or replace harness or connector be-
H01019
tween side airbag assembly (RH) and airbag
W03859 H01180 sensor assembly.
OK
2002 ECHO (RM884U)
Author : Date : 458
DI-289
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
3 Check airbag sensor assembly.
PREPARATION:
(a) Connect the connector to the airbag sensor assembly.
Airbag
(b) Using a service wire, connect SFR+ and SFR- of the con-
Squib (RH) Sensor nector (on the side airbag assembly side) between the
Assembly side airbag assembly (RH) and the airbag sensor assem-
bly.
(c) Connect the negative (-) terminal cable to the battery,
and wait at least for 2 seconds.
CHECK:
ON
SFR- SFR+ (a) Turn the ignition switch to ON and wait at least for 20 se-
conds.
(b) Clear the DTC stored in memory (See page DI-239 ).
(c) Turn the ignition switch to LOCK, and wait at least for 20
DLC3 DTC B0111/44
seconds.
(d) Turn the ignition switch to ON and wait at least for 20 se-
conds.
(e) Check the DTC (See page DI-239 ).
CG Tc
H01020
OK:
W03860 AB0119
H10600 H01070 H12846 DTC B0111/44 is not output.
HINT:
Codes other than code B0111/44 may be output at this time, but
they are not relevant to this check.
NG Replace airbag sensor assembly.
OK
2002 ECHO (RM884U)
Author : Date : 459
DI-290
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
4 Check side squib (RH).
PREPARATION:
(a) Turn the ignition switch to LOCK.
(b) Disconnect the negative (-) terminal cable from the bat-
Airbag
Sensor
tery, and wait at least for 90 seconds.
Squib (RH)
Assembly (c) Connect the side airbag assembly (RH) connector.
(d) Connect the negative (-) terminal cable to the battery,
and wait at least for 2 seconds.
CHECK:
ON (a) Turn the ignition switch to ON and wait at least for 20 se-
conds.
(b) Clear the DTC stored in memory (See page DI-239 ).
(c) Turn the ignition switch to LOCK, and wait at least for 20
DTC B0111/44 seconds.
DLC3
(d) Turn the ignition switch to ON and wait at least for 20 se-
conds.
(e) Check the DTC (See page DI-239 ).
CG Tc
OK:
H01021
DTC B0111/44 is not output.
AB0119
H10600 H01070 H12847 HINT:
Codes other than code B0111/44 may be output at this time, but
they are not relevant to this check.
NG Replace side airbag assembly (RH).
OK
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check.
2002 ECHO (RM884U)
Author : Date : 460
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo