Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Echo 2000-2002 Approved techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 02echorm di rs cib01124
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download cib01124 documenatation <<
Text preview - extract from the document
DI-291
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
DI1NE-15
DTC B0112/41 Short in Side Squib (RH) Circuit (to
Ground)
CIRCUIT DESCRIPTION
The side squib (RH) circuit consists of the airbag sensor assembly and side airbag assembly (RH).
It causes the SRS to deploy when the SRS deployment conditions are satisfied.
For details of the function of each component, see OPERATION on page RS-2 .
DTC B0112/41 is recorded when a ground short is detected in the side squib (RH) circuit.
DTC No. DTC Detecting Condition Trouble Area
S Short circuit in side squib (RH) wire harness (to ground) S Side airbag assembly (RH)
B0112/41 S Side squib (RH) malfunction S Airbag sensor assembly
S Airbag sensor assembly malfunction S Wire harness
WIRING DIAGRAM
See page DI-284 .
INSPECTION PROCEDURE
1 Prepare for inspection (See step 1 on page DI-390 ).
2 Check side squib (RH) circuit.
CHECK:
For the connector (on the side airbag assembly side) between
Airbag the side airbag assembly (RH) and the airbag sensor assembly,
Squib (RH) Sensor measure the resistance between SFR+ and body ground.
Assembly OK:
Resistance: 1 M or Higher
SFR+
(-) (+)
NG Repair or replace harness or connector be-
H01019
tween side airbag assembly (RH) and airbag
H02118 H02126
sensor assembly.
OK
2002 ECHO (RM884U)
Author : Date : 461
DI-292
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
3 Check airbag sensor assembly.
PREPARATION:
(a) Connect the connector to the airbag sensor assembly.
Airbag (b) Using a service wire, connect SFR+ and SFR- of the con-
Squib (RH) Sensor nector (on the side airbag assembly side) between the
Assembly
side airbag assembly (RH) and the airbag sensor assem-
bly.
(c) Connect the negative (-) terminal cable to the battery,
and wait at least for 2 seconds.
ON CHECK:
SFR- SFR+
(a) Turn the ignition switch to ON and wait at least for 20 se-
conds.
(b) Clear the DTC stored in memory (See step 5 on page
DI-239 ).
DTC B0112/41
DLC3 (c) Turn the ignition switch to LOCK, and wait at least for 20
seconds.
(d) Turn the ignition switch to ON and wait at least for 20 se-
CG Tc conds.
H01020
W03860
(e) Check the DTC (See page DI-239 ).
AB0118 AB0119
H10600 H01067 H12848 OK:
DTC B0112/41 is not output.
HINT:
Codes other than code B0112/41 may be output at this time, but
they are not relevant to this check.
NG Replace airbag sensor assembly.
OK
2002 ECHO (RM884U)
Author : Date : 462
DI-293
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
4 Check side squib (RH).
PREPARATION:
(a) Turn the ignition switch to LOCK.
(b) Disconnect the negative (-) terminal cable from the bat-
Airbag
Sensor tery, and wait at least for 90 seconds.
Squib (RH)
Assembly (c) Connect the side airbag assembly (RH) connector.
(d) Connect the negative (-) terminal cable to the battery,
and wait at least for 2 seconds.
CHECK:
ON (a) Turn the ignition switch to ON and wait at least for 20 se-
conds.
(b) Clear the DTC stored in memory (See step 5 on page
DI-239 ).
DTC B0112/41 (c) Turn the ignition switch to LOCK, and wait at least for 20
DLC3 seconds.
(d) Turn the ignition switch to ON and wait at least for 20 se-
conds.
(e) Check the DTC (See page DI-239 ).
CG Tc
H01021
OK:
AB0119
H10600 H01067 H12849 DTC B0112/41 is not output.
HINT:
Codes other than code B0112/41 may be output at this time, but
they are not relevant to this check.
NG Replace side airbag assembly (RH).
OK
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check. If the malfunctioning part can not be
detected by the simulation method, replace all SRS components including the wire harness.
2002 ECHO (RM884U)
Author : Date : 463
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo