Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Echo 2000-2002 Approved techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 02echorm di rs cib01154
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download cib01154 documenatation <<
Text preview - extract from the document
DI-297
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
DI1NG-18
DTC B0115/47 Short in Side Squib (LH) Circuit
CIRCUIT DESCRIPTION
The side squib (LH) circuit consists of the airbag sensor assembly and side airbag assembly (LH).
It causes the SRS to deploy when the SRS deployment conditions are satisfied.
For details of the function of each component, see OPERATION on page RS-2 .
DTC B0115/47 is recorded when a short is detected in the side squib (LH) circuit.
DTC No. DTC Detecting Condition Trouble Area
S Short circuit between SFL+ wire harness and SFL- wire
S Side airbag assembly (LH)
harness of squib
B0115/47 S Airbag sensor assembly
S Side squib (LH) malfunction
S Wire harness
S Airbag sensor assembly malfunction
WIRING DIAGRAM
Airbag Sensor Assembly
S7
Side Squib (LH)
5
1 Y-R C3 SFL+
(*1)
6
2 Y-G
C3 SFL-
(*1)
*1 : w/ Side Airbag H01454
2002 ECHO (RM884U)
Author : Date : 467
DI-298
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
INSPECTION PROCEDURE
1 Prepare for inspection (See step 1 on page DI-390 ).
2 Check side squib (LH) circuit.
PREPARATION:
Release the airbag activation prevention mechanism of the
Airbag
connector (on the airbag sensor assembly side) between the
Squib (LH) Sensor
Assembly airbag sensor assembly and the side airbag assembly (LH)
(See page DI-239 ).
CHECK:
For the connector (on the side airbag assembly side) between
the side airbag assembly (LH) and the airbag sensor assembly,
measure the resistance between SFL+ and SFL-.
SFL- SFL+ OK:
Resistance: 1 M or Higher
(-) (+) NG Repair or replace harness or connector be-
H01019 tween side airbag assembly (LH) and airbag
W03859 H01191
sensor assembly.
OK
2002 ECHO (RM884U)
Author : Date : 468
DI-299
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
3 Check airbag sensor assembly.
PREPARATION:
(a) Connect the connector to the airbag sensor assembly.
Airbag (b) Connect the negative (-) terminal cable to the battery,
Squib (LH) Sensor and wait at least for 2 seconds.
Assembly CHECK:
(a) Turn the ignition switch to ON and wait at least for 20 se-
conds.
(b) Clear the DTC stored in memory (See page DI-239 ).
ON
(c) Turn the ignition switch to LOCK, and wait at least for 20
seconds.
(d) Turn the ignition switch to ON and wait at least for 20 se-
conds.
DLC3 DTC B0115/47 (e) Check the DTC (See page DI-239 ).
OK:
DTC B0115/47 is not output.
HINT:
CG Tc Codes other than code B0115/47 may be output at this time, but
H01017
they are not relevant to this check.
AB0119
H10600 H01073 H12852
NG Replace airbag sensor assembly.
OK
2002 ECHO (RM884U)
Author : Date : 469
DI-300
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
4 Check side squib (LH).
PREPARATION:
Squib (LH)
(a) Turn the ignition switch to LOCK.
Airbag (b) Disconnect the negative (-) terminal cable from the bat-
Sensor tery, and wait at least for 90 seconds.
Assembly (c) Connect the side airbag assembly (LH) connector.
(d) Connect the negative (-) terminal cable to the battery,
and wait at least for 2 seconds.
ON CHECK:
(a) Turn the ignition switch to LOOK, and wait at least for 20
second.
(b) Turn the ignition switch to ON and wait at least for 20 se-
conds.
DLC3 DTC B0115/47 (c) Clear the DTC stored in memory (See page DI-239 ).
(d) Turn the ignition switch to LOCK, and wait at least for 20
seconds.
(e) Turn the ignition switch to ON and wait at least for 20 se-
CG Tc
conds.
H01018 (f) Check the DTC (See page DI-239 ).
AB0119
H10600 H01073 H12853 OK:
DTC B0115/47 is not output.
HINT:
Codes other than code B0115/47 may be output at this time, but
they are not relevant to this check.
NG Replace side airbag assembly (LH).
OK
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check.
2002 ECHO (RM884U)
Author : Date : 470
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo