Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Echo 2000-2002 Approved techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 02echorm di rs cib01377
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download cib01377 documenatation <<
Text preview - extract from the document
DI-330
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
DI1BK-21
DTC B0137/71 Short in P/T Squib (LH) Circuit
(to Ground)
CIRCUIT DESCRIPTION
The P/T squib (LH) circuit consists of the airbag sensor assembly and seat belt pretensioner (LH).
It causes the SRS to deploy when the SRS deployment conditions are satisfied.
For details of the function of each component, see OPERATION on page RS-2 .
DTC B0137/71 is recorded when a ground short is detected in the P/T squib (LH) circuit.
DTC No. DTC Detecting Condition Trouble Area
S Short circuit in P/T squib (LH) wire harness (to ground) S Seat belt pretensioner (LH)
B0137/71 S P/T squib (LH) malfunction S Airbag sensor assembly
S Airbag sensor assembly malfunction S Wire harness
WIRING DIAGRAM
See page DI-323 .
INSPECTION PROCEDURE
1 Prepare for inspection (See step 1 on page DI-390 ).
2 Check P/T squib (LH) circuit.
CHECK:
P/T Squib (LH)
For the connector (on the seat belt pretensioner side) between
the seat belt pretensioner (LH) and the airbag sensor assembly,
Airbag
Sensor measure the resistance between PL+ and body ground.
Assembly OK:
Resistance: 1 M or Higher
PL+
(-) (+)
NG Repair or replace harness or connector be-
tween seat belt pretensioner (LH) and airbag
H01016 sensor assembly.
H08392 H08396
OK
2002 ECHO (RM884U)
Author : Date : 500
DI-331
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
3 Check airbag sensor assembly.
PREPARATION:
(a) Connect the connector to the airbag sensor assembly.
Airbag
(b) Using a service wire, connect PL+ and PL- of the connec-
P/T Squib (LH) Sensor
Assembly tor (on the seat belt pretensioner side) between the seat
belt pretensioner (LH) and the airbag sensor assembly.
(c) Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
PL+ PL-
ON CHECK:
(a) Turn the ignition switch to ON and wait at least for 20 se-
conds.
(b) Clear DTC stored in memory (See step 5 on page
DI-239 ).
DTC B0137/71 (c) Turn the ignition switch to LOCK, and wait at least for 20
DLC3
seconds.
(d) Turn the ignition switch to ON, and wait at least for 20 se-
conds.
CG Tc (e) Check DTC (See page DI-239 ).
H01017
OK:
H02139 AB0119
H10600 H01084 H10631 DTC B0137/71 is not output.
HINT:
Codes other than code B0137/71 may be output at this time, but
they are not relevant to this check.
NG Replace airbag sensor assembly.
OK
2002 ECHO (RM884U)
Author : Date : 501
DI-332
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
4 Check P/T squib (LH).
PREPARATION:
(a) Turn ignition switch to LOCK.
Airbag (b) Disconnect negative (-) terminal cable from the battery,
P/T Squib (LH) Sensor
and wait at least for 90 seconds.
Assembly
(c) Connect the seat belt pretensioner (LH) connector.
(d) Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
ON CHECK:
(a) Turn the ignition switch to ON, and wait at least for 20 se-
conds.
(b) Clear DTC stored in memory (See step 5 on page
DI-239 ).
DLC3 DTC B0137/71 (c) Turn the ignition switch to LOCK, and wait at least for 20
seconds.
(d) Turn the ignition switch to ON, and wait at least for 20 se-
conds.
CG Tc (e) Check DTC (See page DI-239 ).
H01018
OK:
AB0118 AB0119
H10600 H01084 H10632 DTC B0137/71 is not output.
HINT:
Codes other than code B0137/71 may be output at this time, but
they are not relevant to this check.
NG Replace seat belt pretensioner (LH).
OK
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check. If the malfunctioning part can not be
detected by the simulation method, replace all SRS components including the wire harness.
2002 ECHO (RM884U)
Author : Date : 502
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo