Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Echo 2000-2002 Approved techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 02echorm di rs cib11413
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download cib11413 documenatation <<Text preview - extract from the documentDI-350
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
DI6ZX-04
DTC B1141/33 Side Airbag Sensor Assembly (LH)
Malfunction
CIRCUIT DESCRIPTION
The side airbag sensor assembly (LH) consists of the safing sensor, diagnosis circuit and lateral deceleration
sensor, etc.
It receives signals from the lateral deceleration sensor, judges whether or not the SRS must be activated,
and detects diagnosis system malfunction.
DTC B1141/33 is recorded when occurrence of a malfunction in the side airbag sensor assembly (LH) is
detected.
DTC No. DTC Detecting Condition Trouble Area
S Side airbag sensor assembly (LH)
B1141/33 S Side airbag sensor assembly (LH) malfunction S Wire harness
S Airbag sensor assembly
WIRING DIAGRAM
S5
Side Airbag Sensor Assembly (LH) Airbag Sensor Assembly
4 GR-L 12
ESL C3 ESL
(*1)
3 LG-B 10
FSL C3 FSL
(*1)
2 L-W 9
SSL+ C3 SSL+
(*1)
7
1 P-L
VUPL C3 VUPL
(*1)
*1 : w/ Side Airbag H01450
2002 ECHO (RM884U)
Author : Date : 520
DI-351
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
INSPECTION PROCEDURE
1 Is DTC B1141/33 output?
CHECK:
(a) Turn ignition switch to ON and wait at least for 20 se-
conds.
ON
(b) Clear DTC stored in memory (See step 5 on page
DI-239 ).
(c) Turn ignition switch to LOCK, and wait at least for 20 se-
conds.
(d) Turn ignition switch to ON and wait at least for 20 se-
DLC3
DTC B1141/33 conds.
(e) Check DTC (See page DI-239 ).
HINT:
CG Tc Codes other than code B1141/33 may be output at this time, but
they are not relevant to this check.
AB0119
H10600 H09530 H12864
YES The malfunctioning part can now be considered
normal. To make sure of this, use the simulation
method to check.
NO
2 Is connector of side airbag sensor assembly (LH) properly connected?
3 Prepare for inspection (See step 1 on page DI-390 ).
2002 ECHO (RM884U)
Author : Date : 521
DI-352
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
4 Check wire harness.
PREPARATION:
(a) Disconnect the side airbag sensor assembly connector
(LH).
(b) Using a service wire, connect SSL and ESL of the con-
Airbag
nector (on the side airbag sensor assembly side) between
Sensor
Side Airbag Sensor Assembly the side airbag sensor assembly (LH) and the airbag sen-
Assembly (LH) sor assembly.
CHECK:
For the connector (on the airbag sensor assembly side) be-
SSL tween the side airbag sensor assembly (LH) and the airbag
Airbag Sensor
Assembly sensor assembly, measure the resistance between SSL and
ESL.
ESL OK:
Resistance: Below 1
ESL
(+) SSL
H01010
H01058 (-) NG Repair or replace harness or connector be-
H01050 H01166
tween side airbag sensor assembly (LH) and air-
bag sensor assembly.
OK
2002 ECHO (RM884U)
Author : Date : 522
DI-353
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
5 Check wire harness.
Side Airbag Sensor PREPARATION:
Assembly (LH) Using a service wire, connect VUPL and FSL of the connector
(on the side airbag sensor assembly side) between the side air-
Airbag bag sensor assembly (LH) and the airbag sensor assembly.
Sensor CHECK:
Assembly For the connector (on the airbag sensor assembly side) be-
tween the side airbag sensor assembly (LH) and the airbag
sensor assembly, measure the resistance between VUPL and
FSL.
VUPL OK:
Airbag Sensor
Assembly Resistance: Below 1
FSL
FSL
VUPL
(+)
H01010
H01059 (-)
H01051 H01167
NG Repair or replace harness or connector be-
tween side airbag sensor assembly (LH) and air-
bag sensor assembly.
OK
2002 ECHO (RM884U)
Author : Date : 523
DI-354
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
6 Check wire harness (to ground).
CHECK:
Side Airbag Sensor Assembly
(LH) For the connector (on the airbag sensor assembly side) be-
tween the side airbag sensor assembly (LH) and the airbag
Airbag sensor assembly, measure the resistance between body
Sensor ground and each of SSL, VUPL and FSL.
Assembly
OK:
Airbag Sensor Assembly Resistance: 1 M or Higher
SSL
VUPL
FSL (+) (-)
H01008 NG Repair or replace harness or connector be-
H01052 H01168
tween side airbag sensor assembly (LH) and air-
bag sensor assembly.
OK
7 Check wire harness (to B+).
ON Side Airbag Sensor CHECK:
Assembly (LH) (a) Turn ignition switch to ON.
(b) For the connector (on the airbag sensor assembly side)
between the side airbag sensor assembly (LH) and the
Airbag
Sensor airbag sensor assembly, measure the voltage between
Assembly body ground and each of SSL, ESL, VUPL and FSL.
Airbag Sensor Assembly OK:
Voltage: 0 V
FSL SSL
ESL VUPL
H01008
AB0119
(+) (-)
H01053 H08271
NG Repair or replace harness or connector be-
tween side airbag sensor assembly (LH) and air-
bag sensor assembly.
OK
2002 ECHO (RM884U)
Author : Date : 524
DI-355
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
8 Is DTC B1141/33 output again?
Side Airbag Sensor Assembly (LH) PREPARATION:
(a) Connect the connector to the side airbag sensor assem-
bly (LH).
Airbag
(b) Connect the connector to the airbag sensor assembly.
Sensor
Assembly (c) Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
CHECK:
(a) Turn ignition switch to ON and wait at least for 20 se-
ON
conds.
(b) Clear DTC stored in memory (See step 5 on page
DI-239 ).
DTC B1141/33
(c) Turn ignition switch to LOCK, and wait at least for 20 se-
DLC3 conds.
(d) Turn ignition switch to ON and wait at least for 20 se-
conds.
(e) Check DTC (See page DI-239 ).
CG Tc OK:
DTC B1141/33 is not output.
H01007 AB0119
H10600 H01066 H12865 HINT:
Codes other than code B1141/33 may be output at this time, but
they are not relevant to this check.
NO Go to step 9.
YES
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check.
2002 ECHO (RM884U)
Author : Date : 525
DI-356
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
9 Check airbag sensor assembly.
PREPARATION:
(a) Turn ignition switch to LOCK.
(b) Disconnect negative (-) terminal cable from the battery,
Airbag
and wait at least for 90 seconds.
Sensor
Assembly (c) Disconnect the side airbag sensor (LH) from the connec-
Side Airbag Sensor
tor and connect the side airbag sensor (RH) to the con-
Assembly (RH)
nector.
(d) Connect negative (-) terminal cable to the battery, and
ON
wait at least for 2 seconds.
CHECK:
(a) Turn ignition switch to ON and wait at least for 20 se-
conds.
DTC B1141/33
DLC3 (b) Clear DTC stored in memory (See step 5 on page
DI-239 ).
(c) Turn ignition switch to LOCK, and wait at least for 20 se-
conds.
CG Tc (d) Turn ignition switch to ON and wait at least for 20 se-
conds.
H01007 AB0119
H10600 H01066 H12866 (e) Check DTC (See page DI-239 ).
OK:
DTC B1141/33 is not output.
HINT:
Codes other than code B1141/33 may be output at this time, but
they are not relevant to this check.
NG Replace airbag sensor assembly.
OK
2002 ECHO (RM884U)
Author : Date : 526
DI-357
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
10 Check side airbag sensor assembly (LH).
PREPARATION:
(a) Turn ignition switch to LOCK.
Side Airbag Sensor (b) Disconnect negative (-) terminal cable from the battery,
Assembly (LH) Airbag
and wait at least for 90 seconds.
Sensor
Assembly (c) Connect the side airbag sensor (LH) to the connector that
the side airbag sensor (RH) was connected to.
(d) Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
ON CHECK:
(a) Turn ignition switch to ON and wait at least for 20 se-
conds.
(b) Clear DTC stored in memory (See step 5 on page
DTC B1140/32 DI-239 ).
DLC3
(c) Turn ignition switch to LOCK, and wait at least for 20 se-
conds.
(d) Turn ignition switch to ON and wait at least for 20 se-
CG Tc conds.
(e) Check DTC (See page DI-239 ).
H01012 AB0119
H10600 H01065 H12867 OK:
DTC B1140/32 is not output.
HINT:
Codes other than code B1140/32 may be output at this time, but
they are not relevant to this check.
NG Replace side airbag sensor assembly (LH).
OK
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check.
2002 ECHO (RM884U)
Author : Date : 527
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo