Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Echo 2000-2002 Approved techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 02echorm st star repl

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
repl


>> Download repl documenatation <<

Text preview - extract from the document
                                                                                                              ST-1 1
                                                STARTING   -   STARTER
                                                                                                               ST084-04


                                                 REPLACEMENT
                                                 1.    REPLACE BRUSHES
                                                 HINT:
                                                 Only the 2 brushes of the positive (+) side (York side) are ex-
                 Cut
                                                 changeable, negative (-) side brush must be changed in the
                York Side                        body with the brush holder.
                Terminal          York Side      (a) Cut the brush lead wire at the terminal side.
Served Part                       Terminal       (b) Shave welded mark of the brush lead wire with sandpaper
                       Served Part    Z07247
                                                       etc., and correct the terminal to the specified.

                                                 NOTICE:
                         Width Thickness         Part to be shaved is so narrow that you should take care not
                                                 to harm the field coil.
                                                       Specified width: 5.0 mm (0.197 in.)
                                                       Specified thickness: 1.6 mm (0.063 in.)




                                       Z07248



                                                 (c)   Press the plate of the supply brush on the welded side of
                                                       the terminal lead wire.
                       Brush
Weld Side




                                       Z07249



                                                 (d)   Solder the pressed part, and shave to the specified mea-
                                                       sures with the sandpaper etc.
                                                       Specified width: 7.0 mm (0.276 in.)
                                  3.3 mm               Specified thickness: 3.3 mm (0.130 in.)
                                                        S   Heat the soldered part well, and fiow the solder in-
                                                            side the plate, take care not to flow it into flow it into
                                                            the inside lead wire.
              7 mm                                      S   Take care not to flow the solder into field.
                                       Z07250



                                                 2.    REPLACE CENTER BEARING
                                                 (a)   Using SST and press, press out the center bearing.
      SST
                                                       SST 09221-25026 (09221-00090)




                                       Z03208



2002 ECHO (RM884U)

                                                                    Author :              Date :                839
ST-12
                              STARTING   -   STARTER

                               (b)   Using SST and a press in a new center bearing to the
                                     position shown in the illustration.
                                     SST 09221-25026 (09221-00090)
   SST




                     ST0670




2002 ECHO (RM884U)

                                                   Author :        Date :           840



◦ Jabse Service Manual Search 2024 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo