Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Echo 2000-2002 Approved techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 02echorm sa fds disa

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document
disa

>> Download disa documenatation <<

Text preview - extract from the document

SA-20
SUSPENSION AND AXLE - FRONT DRIVE SHAFT
SA129-02

DISASSEMBLY
1. CHECK DRIVE SHAFT
(a) Check to see that there is no remarkable play in the out-
board joint.
(b) Check to see that the inboard joint slides smoothly in the
thrust direction.
(c) Check to see that there is no remarkable play in the radial
direction of the inboard joint.
N00191
(d) Check the boots for damage.
2. REMOVE INBOARD JOINT SHAFT
(a) Using a screwdriver, disclamp the 2 inboard joint boot
clamps.
(b) Slide the inboard joint boot toward the outboard joint.

(c) Place matchmarks on the inboard joint shaft and tripod.
NOTICE:
Do not punch the marks.
(d) Remove the inboard joint shaft from the outboard joint
shaft.
3. REMOVE TRIPOD
Matchmarks (a) Using a snap ring expander, remove the snap ring.

R11817

(b) Place matchmarks on the outboard joint shaft and tripod.
NOTICE:
Do not punch the marks.
(c) Using a brass bar and hammer, tap out the tripod from the
outboard joint shaft.
NOTICE:
Do not tap the roller.
Matchmarks 4. REMOVE INBOARD JOINT BOOT AND 2 CLAMPS
N00194 5. RH drive shaft:
REMOVE DYNAMIC DAMPER
(a) Using a screwdriver, remove the dynamic damper clamp.
(b) Remove the dynamic damper.
6. REMOVE OUTBOARD JOINT BOOT
(a) Using a side cutter, cut the 2 outboard joint boot clamps
and remove them.
(b) Remove the outboard joint boot from the outboard joint
shaft.
NOTICE:
Do not disassemble the outboard joint.

2002 ECHO (RM884U)

Author : Date : 980
SA-21
SUSPENSION AND AXLE - FRONT DRIVE SHAFT

7. REMOVE DUST COVER
Using SST and a press, remove the dust cover from the inboard
SST
joint shaft.
SST 09950-00020

R09716

2002 ECHO (RM884U)

Author : Date : 981

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo