Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Echo 2000-2002 Approved techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 02echorm sa fds inst

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download inst documenatation <<

Text preview - extract from the document

SA-24
                     SUSPENSION AND AXLE    -   FRONT DRIVE SHAFT
                                                                                                 SA1KZ-02


                                   INSTALLATION
                                   1.     INSTALL DRIVE SHAFT TO TRANSAXLE
                                   (a)    Install a new snap ring to the inboard joint shaft.
                                   (b)    Coat the gear oil to the inboard joint shaft and transaxle
                                          sliding surface.
                                   (c) Set the snap ring with opening side facing downward.
                                   (d) Using a brass bar and hammer, tap the snap ring and
                                          install the drive shaft.
                                   NOTICE:
                                   Be careful not to damage the dust cover and oil seal.
                                   HINT:
                                   Whether the inboard joint shaft is in contact with the pinion shaft
                                   or not can be known from the sound or feeling when driving it
                                   in.
                                   (e) Check that there is 2 - 3 mm (0.08 - 0.12 in.) of play in
                                          the axial direction.
                                   (f)    Check that the drive shaft cannot be removed by hand.
                                   2.     CONNECT DRIVE SHAFT TO AXLE HUB
                                   NOTICE:
                                   Be careful not to damage the boot and ABS speed sensor
                                   rotor.
                                   3.     CONNECT TIE ROD END TO STEERING KNUCKLE
                                   (a) Connect the tie rod end to the steering knuckle with the
                                          nut.
                                          Torque: 49 N

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo