Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Echo 2000-2002 Approved techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 02echorm sf inje inst

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download inst documenatation <<

Text preview - extract from the document

                                                                                                          SF-23
                                                  SFI   -   INJECTOR
                                                                                                           SF16R-01


                                            INSTALLATION
              New Grommet                   1.      INSTALL INJECTORS AND DELIVERY PIPES
                                            (a)     Install a new grommet to each injector.
                                            (b)     Apply a light coat of spindle oil or gasoline to new O-ring
                                                    and install them to each injector.



                     New O-Ring
                                   B00201



                                            (c)     Apply a light coat of spindle oil or gasoline on the place
             Turn                                   where a delivery pipe touches on O-ring.
                                            (d)     While turning the injector clockwise and counterclock-
                            Push
Connector                                           wise, push it to the delivery pipes. Install the 4 injectors.
                                            (e)     Position the injector connector outward.
                                            (f)     Place the 2 spacers in position on the cylinder head.



                                   B00202



                                            (g)    Apply a light coat of spindle oil or gasoline on the place
                                                   where a cylinder head touches an grommet of the injector.
                                            (h)    Place the delivery pipe and fuel pipe together with the 4
                                                   injectors in position on the cylinder head.
                                            (i)    Temporarily install the 2 bolts holding the delivery pipe to
                                                   the cylinder head.
                                            (j)    Temporarily install the bolt holding the fuel pipe to the cyl-
                                                   inder head.
                                   B09527



                                            (k) Check that the injectors rotate smoothly.
                                            HINT:
                                            If injectors do not rotate smoothly, the probable cause is incor-
        Rotate                              rect installation of O-ring. Replace the O-ring.
                                            (l)    Position the injector connector connector outward.


       Outward

                                   B00071



                                            (m)    Tighten the 2 bolts holding the delivery pipe to the cylinder
                                                   head.
                                                   Torque: 19 N

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo