Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Echo 2000-2002 Approved techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 02echorm sr dribel insp

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download insp documenatation <<

Text preview - extract from the document

                                                                                                        SR-3
                                         STEERING   -   DRIVE BELT


                                          DRIVE BELT                                                    SR0ZU-01


                                          INSPECTION
                                          INSPECT DRIVE BELT
                                          (a) Visually check the belt for excessive wear, frayed cords,
                                                etc.
                                          If any defect has been found, replace the drive belt.
                                          HINT:
                               P06717
                                          Cracks on the rib side of a belt are considered acceptable. If the
                                          missing chunks from the ribs are found on the belt, it should be
                                          replaced.




         DENSO           Borroughs        (b)    Using a belt tension gauge, measure the belt tension.
                                                 Belt tension gauge:
                                                 DENSO BTG-20 (95506-00020) or
                                                 Borroughs No. BT-33-73F
                                                 Drive belt tension:
                                                 New belt: 440 - 540 N (45 - 55 kgf)
                                                 Used belt: 240 - 340 N (25 - 35 kgf)
                                          If the belt tension is not as specified, adjust it.
                                Z00038



                                          HINT:
                                           S      "New belt" refers to a belt which has been used less than
                                                  5 minutes on a running engine.
                                           S      "Used belt" refers to a belt which has been used on a run-
                                                  ning engine for 5 minutes or more.
                                           S      After installing a belt, check that it fits properly in the
 CORRECT         WRONG   WRONG                    ribbed grooves.
                                           S      Check with your hand to confirm that the belt has not
                               CH0087             slipped out of the groove on the bottom of the pulley.
                                           S      After installing a new belt, run the engine for about 5 min-
                                                  utes and recheck the belt tension.




2002 ECHO (RM884U)

                                                              Author :             Date :               1063

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo