Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 05 eg cip0450p
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download cip0450p documenatation <<
Text preview - extract from the document
DI-95
DIAGNOSTICS - ENGINE
DI081-05
DTC P0450 Evaporative Emission Control System Pres-
sure Sensor Malfunction
DTC P0451 Evaporative Emission Control System Pres-
sure Sensor Range/Performance
CIRCUIT DESCRIPTION
The vapor pressure sensor, VSV for canister closed valve (CCV) and VSV for pressure switching valve are
used to detect abnormalities in the evaporative emission control system.
The ECM decides whether there is an abnormality in the evaporative emission control system based on the
vapor pressure sensor signal.
DTC P0450 or P0451 is recorded by the ECM when the vapor pressure sensor malfunction.
ECM
Vapor Pressure Sensor
VSV for
VSV for VSV for Pressure Fuel Tank Over
CCV EVAP Switching Valve Fill Check Valve
Charcoal Canister Fuel Tank
A10145
DTC No. DTC Detecting Condition Trouble Area
10 seconds or less after engine starting condition vapor pres-
P0450 sure sensor fixed value continues for fixed value or more: (2
trip detection logic)
Vapor pressure sensor output extremely changes under condi- S Open or short in vapor pressure sensor circuit
tions of (a) and (b): (2 trip detection logic) S Vapor pressure sensor
(a) Vehicle speed: 0 km/h (0mph), Engine speed: Idling and S ECM
P0451
VSV for pressure switching valve is OFF
(b) vavor pressure sensor value y opening pressure valve of
charcoal canister
2001 SIENNA (RM787U)
Author : Date : 249
DI-96
DIAGNOSTICS - ENGINE
WIRING DIAGRAM
Refer to DTC P0440 P0442 on page DI-72 .
INSPECTION PROCEDURE
HINT:
S If DTC P0441, P0446, P0450 or P0451 is output after DTC P0440 or P0442, first trouble shoot DTC
P0441, P0446 P0450 or P0451. If no malfunction is detected, troubleshoot DTC P0440 or P0442 next.
S Read freeze frame data using TOYOTA hand-held tester or OBD II scan tool. Because freeze frame
records the engine conditions when the malfunction is detected. When troubleshooting, it is useful for
determining whether the vehicle was running or stopped, the engine was warmed up or not, the air-fuel
ratio was lean or rich, etc. at the time of the malfunction.
S When the ENGINE RUN TIME in the freeze frame data is less than 200 seconds, carefully check the
VSV for EVAP, charcoal canister and vapor pressure sensor.
1 Check voltage between terminals VC and E2 of ECM connector (See page
DI-72 ).
NG Check and replace ECM (See page IN-31 ).
OK
2 Check voltage between terminals PTNK and E2 of ECM connectors (See page
DI-72 ).
OK Check and replace ECM (See page IN-31 ).
NG
3 Check for open and short in harness and connector between vapor pressure sen-
sor and ECM (See page IN-31 ).
NG Repair or replace harness or connector.
OK
Replace vapor pressure sensor.
2001 SIENNA (RM787U)
Author : Date : 250
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo