Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 05 eg cip0121
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download cip0121 documenatation <<Text preview - extract from the document DI-41
DIAGNOSTICS - ENGINE
DI21Y-03
DTC P0121 Throttle/Pedal Position Sensor/Switch "A"
Circuit Range/Performance Problem
CIRCUIT DESCRIPTION
Refer to DTC P0120 on page DI-37.
DTC No. DTC Detecting Condition Trouble Area
After vehicle speed has been exceeded 30 km/h (19 mph)
even once, output value of throttle position sensor is out of
P0121 applicable range while vehicle speed between 30 km/h (19 S Throttle position sensor
mph) and 0 km/h (0 mph)
(2 trip detection logic)
INSPECTION PROCEDURE
HINT:
Read freeze frame data using TOYOTA hand-held tester or OBD II scan tool. Because freeze frame records
the engine conditions when the malfunction is detected, when troubleshooting it is useful for determining
whether the vehicle was running or stopped, the engine warmed up or not, the air-fuel ratio lean or rich, etc.
at the time of the malfunction.
1 Are there any other codes (besides DTC P0121) being output ?
YES Go to relevant DTC chart.
NO
Replace throttle position sensor.
2001 SIENNA (RM787U)
Author : Date : 195
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo