Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 05 eg cip1780

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download cip1780 documenatation <<

Text preview - extract from the document

DI-140
                                                  DIAGNOSTICS       -   ENGINE
                                                                                                                               DI22J-03




    DTC                 P1780               Park/Neutral Position Switch Malfunction

CIRCUIT DESCRIPTION
The park/neutral position switch go on when the shift lever is in the N or P shift position. When it goes on
terminal NSW of the ECM is grounded to body ground via the starter relay, thus the terminal NSW voltage
becomes 0V. When the shift lever is in the D, 2, L or R position, the park/neutral position switch goes off,
so the voltage of ECM. Terminal NSW becomes battery voltage, the voltage of the ECM internal power
source. If the shift lever is moved from the N position to the D position, this signal is used for air-fuel ratio
correction and for idle speed control (estimated control), etc.
   DTC No.                       DTC Detecting Condition                                                Trouble Area
              2 or more switches are ON simultaneously for "N", "2", "L" and
              "R" positions
               (2 trip detection logic)
                                                                               S Sh t i park/neutral position switch circuit
                                                                                 Short in   k/    t l     iti   it h i it
              When driving under conditions (a) and (b) for 30 sec. or more
    P1780                                                                      S Park/neutral position switch
              the park/neutral position switch is ON (N position):
                                                                               S ECM
              (2 trip detection logic)
              (a) Vehicle speed: 70 km/h (44 mph) or more
              (b) Engine speed: 1,500 x NE and 2,500 rpm

HINT:
After confirming DTC P1780, use the TOYOTA hand-held tester to confirm the PNP switch signal from
"CURRENT DATA".

WIRING DIAGRAM
Refer to DTC P1780 on page DI-197 .

INSPECTION PROCEDURE
Refer to DTC P1780 on page DI-197 .
HINT:
Read freeze frame data using TOYOTA hand-held tester or OBD II scan tool. because freeze frame records
the engine conditions when the malfunction is detected, when troubleshooting it is useful for determining
whether the vehicle was running or stopped, the engine warmed up or not, the air-fuel ratio lean or rich, etc.
at the time of the malfunction.




 2001 SIENNA (RM787U)

                                                                                  Author :                     Date :            294

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo