Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 05 psdcsy ci23

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
ci23


>> Download ci23 documenatation <<

Text preview - extract from the document
DI-514
                                                     DIAGNOSTICS       -   POWER SLIDE DOOR CONTROL SYSTEM
                                                                                                                                DI4EX-02




    DTC                    2-3                No Secondary Latch Input

CIRCUIT DESCRIPTION
This code remains set until the door is detected to be fully closed. Power close operation is possible when
this code is set.
   DTC No.                         DTC Detecting Condition                                           Trouble Area
                Either of the following 1. or 2. is detected:
                1. Door has traveled to the fully closed position and the sec-
    2-3            ondary latch position has not been detected.                     S Latch SW
                2. Power opening operation is requested but a latch signal is
                   not detected.


WIRING DIAGRAM
  The circuit are on RH and LH SIDE individually


                                                                                                                    Power Slide Door
          Slide Door Junction                                                                                       ECU
          Connector
                                         8    7                                                         6    6
                       (*1) R (*1) B                                                      G
                                       S14 S12                                                         S30 S32 DSW
                       (*2) LG (*2) LG
                                       (*1) (*2)                                                       (*2) (*1)
             (*2) 1 S34
             (*1) 2 S20

         Latch
         Switch

             (*1) 1 S20
             (*2)2 S34
                                         7    8 W-B
                       (*1) LG (*1) LG
                       (*2) R (*2) B S14 S12        (*1)                           (*2)
                                       (*1) (*2)
                                                  BO                             BK


                                                                                                      (*1) RH SIDE

                                                                                                      (*2) LH SIDE
                                                                                                                                  I19495




2001 SIENNA (RM787U)

                                                                                          Author :        Date :                  668
                                                                                          DI-515
                                 DIAGNOSTICS   -   POWER SLIDE DOOR CONTROL SYSTEM

INSPECTION PROCEDURE

  1     Check latch switch (See page BE-78 ).


                                        NG         Replace the latch switch.


  OK



  2     Check wire harness and connector between latch switch and power slide door
        ECU, latch switch and body ground (See page IN-21 ).


                                        NG         Repair or replace wire harness and connector.


  OK



 Replace the power slide door ECU.




2001 SIENNA (RM787U)

                                                         Author :           Date :          669



◦ Jabse Service Manual Search 2026 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo