Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 05 rs cib01055
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download cib01055 documenatation <<
Text preview - extract from the document
DI-388
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
DI4CO-06
DTC B0105/53 Short in P Squib Circuit
CIRCUIT DESCRIPTION
The P squib circuit consists of the airbag sensor assembly and front passenger airbag assembly.
It causes the SRS to deploy when the SRS deployment conditions are satisfied.
For details of the function of each component, see OPERATION on page RS-2 .
DTC B0105/53 is recorded when a short is detected in the P squib circuit.
DTC No. DTC Detecting Condition Trouble Area
S Short circuit in P squib wire harness S Front passenger airbag assembly (P squib)
B0105/53 S P squib malfunction S Airbag sensor assembly
S Airbag sensor assembly malfunction S Wire harness
WIRING DIAGRAM
Airbag Sensor Assembly
P Squib
10
1 Y-R
C5 P+
11
2 Y-G
C5 P-
H01454
2001 SIENNA (RM787U)
Author : Date : 542
DI-389
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
INSPECTION PROCEDURE
1 Prepare for inspection (See step 1 on page DI-486 ).
2 Check P squib circuit.
PREPARATION:
P Squib Release the airbag activation prevention mechanism of the
Airbag connector (on the airbag sensor assembly side) between the
Sensor front passenger airbag assembly and the airbag sensor assem-
Assembly bly (See page DI-358 ).
CHECK:
For the connector (on the front passenger airbag assembly
side) between the front passenger airbag assembly and the air-
P- P+
bag sensor assembly, measure the resistance between P+ and
P-.
OK:
(-) (+) Resistance: 1 M or Higher
R14286
H02142 H02251 NG Repair or replace harness or connector be-
tween front passenger airbag assembly and air-
bag sensor assembly.
OK
2001 SIENNA (RM787U)
Author : Date : 543
DI-390
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
3 Check airbag sensor assembly.
PREPARATION:
P Squib (a) Connect the connector to the airbag sensor assembly.
Airbag (b) Connect negative (-) terminal cable to the battery, and
Sensor wait at least for 2 seconds.
Assembly CHECK:
(a) Turn the ignition switch to ACC or ON and wait at least for
20 seconds.
ACC ON (b) Clear the DTC stored in memory (See page DI-358 ).
(c) Turn the ignition switch to LOCK, and wait at least for 20
seconds.
or
(d) Turn the ignition switch to ACC or ON, and wait at least
DLC1 for 20 seconds.
DTC B0105/53
(e) Check the DTC (See page DI-358 ).
OK:
DTC B0105/53 is not output.
HINT:
E1 Tc Codes other than code B0105/53 may be output at this time, but
H01023 they are not relevant to this check.
AB0118 AB0119
R13006 H01077 H07479
NG Replace airbag sensor assembly.
OK
2001 SIENNA (RM787U)
Author : Date : 544
DI-391
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
4 Check P squib.
PREPARATION:
(a) Turn the ignition switch to LOCK.
P Squib
Airbag
(b) Disconnect negative (-) terminal cable from the battery,
Sensor and wait at least for 90 seconds.
Assembly (c) Connect the front passenger airbag assembly connector.
(d) Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
ACC ON CHECK:
(a) Turn the ignition switch to LOOK, and wait at least for 20
seconds.
or (b) Turn the ignition switch to ACC or ON, and wait at least
for 20 seconds.
DLC1
DTC B0105/53 (c) Clear the DTC stored in memory (See page DI-358 ).
(d) Turn the ignition switch to LOCK, and wait at least for 20
seconds.
(e) Turn the ignition switch to ACC or ON, and wait at least
E1 Tc for 20 seconds.
H01024 (f) Check the DTC (See page DI-358 ).
AB0118 AB0119
R13006 H01077 H01202 OK:
DTC B0105/53 is not output.
HINT:
Codes other than code B0105/53 may be output at this time, but
they are not relevant to this check.
NG Replace front passenger airbag assembly.
OK
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check.
2001 SIENNA (RM787U)
Author : Date : 545
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo