Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 05 rs cib01065
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download cib01065 documenatation <<
Text preview - extract from the document
DI-392
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
DI4CP-06
DTC B0106/54 Open in P Squib Circuit
CIRCUIT DESCRIPTION
The P squib circuit consists of the airbag sensor assembly and front passenger airbag assembly.
It causes the SRS to deploy when the SRS deployment conditions are satisfied.
For details of the function of each component, see OPERATION on page RS-2 .
DTC B0106/54 is recorded when an open is detected in the P squib circuit.
DTC No. DTC Detecting Condition Trouble Area
S Open circuit in P+ wire harness or P- wire harness of
S Front passenger airbag assembly (P squib)
squib
B0106/54 S Airbag sensor assembly
S P squib malfunction
S Wire harness
S Airbag sensor assembly malfunction
WIRING DIAGRAM
See page DI-388 .
INSPECTION PROCEDURE
1 Prepare for inspection (See step 1 on page DI-486 ).
2 Check P squib circuit.
CHECK:
For the connector (on the front passenger airbag assembly
P Squib
Airbag side) between the front passenger airbag assembly and the air-
Sensor bag sensor assembly, measure the resistance between P+ and
Assembly P-.
OK:
Resistance: Below 1
P- P+
(-) (+) NG Repair or replace harness or connector be-
R14286
tween front passenger airbag assembly and air-
H02142 H02251 bag sensor assembly.
OK
2001 SIENNA (RM787U)
Author : Date : 546
DI-393
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
3 Check airbag sensor assembly.
PREPARATION:
P Squib (a) Connect the connector to the airbag sensor assembly.
Airbag (b) Using a service wire, connect P+ and P- of the connector
Sensor (on the front passenger airbag assembly side) between
Assembly the front passenger airbag assembly and the airbag sen-
sor assembly.
(c) Connect negative (-) terminal cable to the battery, and
ACC ON wait at least for 2 seconds.
P- P+ CHECK:
(a) Turn the ignition switch to ACC or ON and wait at least for
or
20 seconds.
DLC1 (b) Clear the DTC stored in memory (See page DI-358 ).
DTC B0106/54
(c) Turn the ignition switch to LOCK, and wait at least for 20
seconds.
(d) Turn the ignition switch to ACC or ON, and wait at least
for 20 seconds.
E1 Tc (e) Check the DTC (See page DI-358 ).
H01023
H02144
OK:
AB0118 AB0119
R13006 H01078 H02253 DTC B0106/54 is not output.
HINT:
Codes other than code B0106/54 may be output at this time, but
they are not relevant to this check.
NG Replace airbag sensor assembly.
OK
2001 SIENNA (RM787U)
Author : Date : 547
DI-394
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
4 Check P squib.
PREPARATION:
(a) Turn the ignition switch to LOCK.
P Squib
Airbag (b) Disconnect negative (-) terminal cable from the battery,
Sensor and wait at least for 90 seconds.
Assembly (c) Connect the front passenger airbag assembly connector.
(d) Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
ACC ON CHECK:
(a) Turn the ignition switch to ACC or ON, and wait at least
for 20 seconds.
or (b) Clear the DTC stored in memory (See page DI-358 ).
(c) Turn the ignition switch to LOCK, and wait at least for 20
DLC1
DTC B0106/54 seconds.
(d) Turn the ignition switch to ACC or ON, and wait at least
for 20 seconds.
(e) Check the DTC (See page DI-358 ).
OK:
E1 Tc
DTC B0106/54 is not output.
H01024
AB0118 AB0119 HINT:
R13006 H01078 H01205
Codes other than code B0106/54 may be output at this time, but
they are not relevant to this check.
NG Replace front passenger airbag assembly.
OK
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check.
2001 SIENNA (RM787U)
Author : Date : 548
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo