Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 05 rs cib01104
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download cib01104 documenatation <<
Text preview - extract from the document
DI-401
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
DI6MS-03
DTC B0110/43 Short in Side Squib (RH) Circuit
CIRCUIT DESCRIPTION
The side squib (RH) circuit consists of the airbag sensor assembly and side airbag assembly (RH).
It causes the SRS to deploy when the SRS deployment conditions are satisfied.
For details of the function of each component, see OPERATION on page RS-2 .
DTC B0110/43 is recorded when a short is detected in the side squib (RH) circuit.
DTC No. DTC Detecting Condition Trouble Area
S Short circuit between SFR+ wire harness and SFR- wire
S Side airbag assembly (RH)
harness of squib
B0110/43 S Airbag sensor assembly
S Side squib (RH) malfunction
S Wire harness
S Airbag sensor assembly malfunction
WIRING DIAGRAM
Airbag Sensor Assembly
Side Squib (RH)
2
Y-R Y-R
BK1 C7 SFR+
1
1
Y-G Y-G
BK1 C7 SFR-
2
H16799
2001 SIENNA (RM787U)
Author : Date : 555
DI-402
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
INSPECTION PROCEDURE
1 Prepare for inspection (See step 1 on page DI-486 ).
2 Check side squib (RH) circuit.
PREPARATION:
Release the airbag activation prevention mechanism of the
Airbag connector (on the airbag sensor assembly side) between the
Squib (RH) Sensor airbag sensor assembly and the side airbag assembly (RH)
Assembly (See page DI-358 ).
CHECK:
For the connector (on the side airbag assembly side) between
the side airbag assembly (RH) and the airbag sensor assembly,
SFR- SFR+ measure the resistance between SFR+ and SFR-.
OK:
Resistance: 1 M or Higher
(-) (+)
H17215
H09668 H17551
NG Repair or replace harness or connector be-
tween side airbag assembly (RH) and airbag
sensor assembly.
OK
2001 SIENNA (RM787U)
Author : Date : 556
DI-403
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
3 Check airbag sensor assembly.
PREPARATION:
(a) Connect the connector to the airbag sensor assembly.
(b) Connect negative (-) terminal cable to the battery, and
Airbag
Squib (RH) Sensor wait at least for 2 seconds.
Assembly CHECK:
(a) Turn the ignition switch to ACC or ON and wait at least for
20 seconds.
(b) Clear the DTC stored in memory (See page DI-358 ).
ACC ON (c) Turn the ignition switch to LOCK, and wait at least for 20
seconds.
or (d) Turn the ignition switch to ACC or ON, and wait at least
for 20 seconds.
DLC1
DTC B0110/43 (e) Check the DTC (See page DI-358 ).
OK:
DTC B0110/43 is not output.
HINT:
E1 Codes other than code B0110/43 may be output at this time, but
Tc
H17553
they are not relevant to this check.
AB0118 AB0119
R13006 H01069 H17552
NG Replace airbag sensor assembly.
OK
2001 SIENNA (RM787U)
Author : Date : 557
DI-404
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
4 Check side squib (RH).
PREPARATION:
(a) Turn the ignition switch to LOCK.
(b) Disconnect negative (-) terminal cable from the battery,
Airbag
Sensor
and wait at least for 90 seconds.
Squib (RH)
Assembly (c) Connect the side airbag assembly (RH) connector.
(d) Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
CHECK:
ACC ON (a) Turn the ignition switch to LOOK, and wait at least for 20
second.
or (b) Turn the ignition switch to ACC or ON, and wait at least
for 20 seconds.
DLC1 DTC B0110/43 (c) Clear the DTC stored in memory (See page DI-358 ).
(d) Turn the ignition switch to LOCK, and wait at least for 20
seconds.
(e) Turn the ignition switch to ACC or ON, and wait at least
E1 Tc for 20 seconds.
(f) Check the DTC (See page DI-358 ).
H17217
AB0118 AB0119
R13006 H01069 H17554 OK:
DTC B0110/43 is not output.
HINT:
Codes other than code B0110/43 may be output at this time, but
they are not relevant to this check.
NG Replace side airbag assembly (RH).
OK
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check.
2001 SIENNA (RM787U)
Author : Date : 558
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo