Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 05 rs cib01174
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download cib01174 documenatation <<
Text preview - extract from the document
DI-421
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
DI6MY-03
DTC B0117/45 Short in Side Squib (LH) Circuit (to
Ground)
CIRCUIT DESCRIPTION
The side squib (LH) circuit consists of the airbag sensor assembly and side airbag assembly (LH).
It causes the SRS to deploy when the SRS deployment conditions are satisfied.
For details of the function of each component, see OPERATION on page RS-2 .
DTC B0117/45 is recorded when ground short is detected in the side squib (LH) circuit.
DTC No. DTC Detecting Condition Trouble Area
S Short circuit in side squib (LH) wire harness (to ground) S Side airbag assembly (LH)
B0117/45 S Side squib (LH) malfunction S Airbag sensor assembly
S Airbag sensor assembly malfunction S Wire harness
WIRING DIAGRAM
See page DI-414 .
INSPECTION PROCEDURE
1 Prepare for inspection (See step 1 on page DI-486 ).
2 Check side squib (LH) circuit.
CHECK:
Squib (LH) For the connector (on the side airbag assembly side) between
the side airbag assembly (LH) and the airbag sensor assembly,
Airbag
measure the resistance between SFL+ and body ground.
Sensor
Assembly OK:
Resistance: 1 M or Higher
SFL+
(-) (+)
NG Repair or replace harness or connector be-
tween side airbag assembly (LH) and airbag
H17219
H09669 H17569
sensor assembly.
OK
2001 SIENNA (RM787U)
Author : Date : 575
DI-422
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
3 Check airbag sensor assembly.
PREPARATION:
Squib (LH)
(a) Connect the connector to the airbag sensor assembly.
Airbag
(b) Using a service wire, connect SFL+ and SFL- of the con-
Sensor nector (on the side airbag assembly side) between the
Assembly side airbag assembly (LH) and the airbag sensor assem-
bly.
(c) Connect negative (-) terminal cable to the battery, and
ACC ON wait at least for 2 seconds.
SFL- SFL+
CHECK:
or (a) Turn the ignition switch to ACC or ON and wait at least for
20 seconds.
(b) Clear the DTC stored in memory
DLC1 DTC B0117/45 (See step 5 on page DI-358 ).
(c) Turn the ignition switch to LOCK, and wait at least for 20
seconds.
(d) Turn the ignition switch to ACC or ON, and wait at least
E1 Tc for 20 seconds.
H17220
H09671
(e) Check DTC (See page DI-358 ).
AB0118 AB0119
R13006 H01071 H17570 OK:
DTC B0117/45 is not output.
HINT:
Codes other than code B0117/45 may be output at this time, but
they are not relevant to this check.
NG Replace airbag sensor assembly.
OK
2001 SIENNA (RM787U)
Author : Date : 576
DI-423
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
4 Check side squib (LH).
PREPARATION:
Squib (LH)
(a) Turn the ignition switch to LOCK.
(b) Disconnect negative (-) terminal cable from the battery,
Airbag
and wait at least for 90 seconds.
Sensor
Assembly (c) Connect the front side airbag assembly (LH) connector.
(d) Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
CHECK:
ACC ON (a) Turn the ignition switch to ACC or ON, and wait at least
for 20 seconds.
or (b) Clear the DTC stored in memory
(See step 5 on page DI-358 ).
DLC1 DTC B0117/45 (c) Turn the ignition switch to LOCK, and wait at least for 20
seconds.
(d) Turn the ignition switch to ACC or ON, and wait at least
for 20 seconds.
(e) Check the DTC (See page DI-358 ).
E1 Tc
H17221
OK:
AB0118 AB0119 DTC B0117/45 is not output.
R13006 H01071 H17571
HINT:
Codes other than code B0117/45 may be output at this time, but
they are not relevant to this check.
NG Replace front side airbag assembly (LH).
OK
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check. If the malfunctioning part can not be
detected by the simulation method, replace all SRS components including the wire harness.
2001 SIENNA (RM787U)
Author : Date : 577
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo