Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 05 rs cib01316
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download cib01316 documenatation <<
Text preview - extract from the document
DI-431
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
DI4D1-06
DTC B0131/64 Open in P/T Squib (RH) Circuit
CIRCUIT DESCRIPTION
The P/T squib circuit (RH) consists of the airbag sensor assembly and seat belt pretensioner (RH).
It causes the SRS to deploy when the SRS deployment conditions are satisfied.
For details of the function of each component, see OPERATION on page RS-2 .
DTC B0131/64 is recorded when an open is detected in the P/T squib (RH) circuit.
DTC No. DTC Detecting Condition Trouble Area
S Open circuit in PR+ wire harness or PR- wire harness of
S Seat belt pretensioner (RH)
squib
B0131/64 S Airbag sensor assembly
S P/T squib (RH) malfunction
S Wire harness
S Airbag sensor assembly malfunction
WIRING DIAGRAM
See page DI-427 .
INSPECTION PROCEDURE
1 Prepare for inspection (See step 1 on page DI-486 ).
2 Check P/T squib (RH) circuit.
CHECK:
For the connector (on the seat belt pretensioner side) between
Airbag
the seat belt pretensioner (RH) and the airbag sensor assem-
P/T Squib (RH) Sensor
Assembly bly, measure the resistance between PR+ and PR-.
OK:
Resistance: Below 1
PR+ PR-
(+) (-) NG Repair or replace harness or connector be-
tween seat belt pretensioner (RH) and airbag
H01019
H02141 H02205 sensor assembly.
OK
2001 SIENNA (RM787U)
Author : Date : 585
DI-432
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
3 Check airbag sensor assembly.
PREPARATION:
(a) Connect the connector to the airbag sensor assembly.
Airbag (b) Using a service wire, connect PR+ and PR- of the con-
P/T Squib (RH) Sensor nector (on the seat belt pretensioner side) between the
Assembly
seat belt pretensioner (RH) and the airbag sensor assem-
bly.
(c) Connect negative (-) terminal cable to the battery, and
ACC ON wait at least for 2 seconds.
PR+ PR-
CHECK:
(a) Turn the ignition switch to ACC or ON and wait at least for
or
20 seconds.
(b) Clear the DTC stored in memory (See page DI-358 ).
(c) Turn the ignition switch to LOCK, and wait at least for 20
DLC1 DTC B0131/64 seconds.
(d) Turn the ignition switch to ACC or ON, and wait at least
for 20 seconds.
(e) Check the DTC (See page DI-358 ).
E1 Tc
H01020 OK:
H02139
AB0118 AB0119 DTC B0131/64 is not output.
R13006 H01083 H02206
HINT:
Codes other than code B0131/64 may be output at this time, but
they are not relevant to this check.
NG Replace airbag sensor assembly.
OK
2001 SIENNA (RM787U)
Author : Date : 586
DI-433
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
4 Check P/T squib (RH).
PREPARATION:
(a) Turn the ignition switch to LOCK.
(b) Disconnect negative (-) terminal cable from the battery,
Airbag
Sensor
and wait at least for 90 seconds.
P/T Squib (RH)
Assembly (c) Connect the seat belt pretensioner (RH) connector.
(d) Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
CHECK:
ACC ON (a) Turn the ignition switch to ACC or ON, and wait at least
for 20 seconds.
(b) Clear the DTC stored in memory (See page DI-358 ).
or
(c) Turn the ignition switch to LOCK, and wait at least for 20
DLC1 DTC B0131/64 seconds.
(d) Turn the ignition switch to ACC or ON, and wait at least
for 20 seconds.
(e) Check the DTC (See page DI-358 ).
E1 Tc OK:
H01021
DTC B0131/64 is not output.
AB0118 AB0119
R13006 H01083 H01217 HINT:
Codes other than code B0131/64 may be output at this time, but
they are not relevant to this check.
NG Replace seat belt pretensioner (RH).
OK
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check.
2001 SIENNA (RM787U)
Author : Date : 587
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo