
DI-479
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
DI8AU-01
DTC B1158/B1159/16 Front Airbag Sensor (LH) Malfunction
CIRCUIT DESCRIPTION
The front airbag sensor (LH) circuit consists of the airbag sensor assembly and front airbag sensor (LH).
For details of the function of each component, see OPERATION on page RS-2 .
DTC B1158/B1159/16 is recorded when malfunction is detected in the front airbag sensor (LH) circuit.
DTC No. DTC Detecting Condition Trouble Area
S Front airbag sensor (LH)
B1158/B1159/16 S Front airbag sensor (LH) malfunction S Airbag sensor assembly
S Wire harness
WIRING DIAGRAM
Front Airbag Sensor (LH) Airbag Sensor Assembly
15
2 W-R
SL+ C5 SL+
26
1 BR
SL- C5 SL-
H02751
2001 SIENNA (RM787U)
Author : Date : 633
DI-480
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
INSPECTION PROCEDURE
1 Prepare for inspection (See step 1 on page DI-486 ).
2 Check front airbag sensor (LH) circuit.
CHECK:
For the connector (on the airbag sensor assembly side) be-
Airbag
tween the front airbag sensor (LH) and the airbag sensor as-
Sensor
Assembly
sembly, measure the resistance between SL+ and SL-.
Front Airbag
OK:
Sensor (LH) Resistance: 754 - 886
Airbag Sensor
Assembly
SL+
SL-
H02735
NG Go to step 6.
OK
2001 SIENNA (RM787U)
Author : Date : 634
DI-481
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
3 Check front airbag sensor (LH) circuit (to ground).
CHECK:
For the connector (on the airbag sensor assembly side) be-
Airbag
Sensor tween the front airbag sensor (LH) and the airbag sensor as-
Assembly sembly, measure the resistance between SL+ and body
Front Airbag ground.
Sensor (LH) OK:
Airbag Sensor
Resistance: 1 M or Higher
Assembly
SL+
H02736 NG Go to step 7.
OK
4 Check front airbag sensor (LH) circuit (to B+).
PREPARATION:
Connect negative (-) terminal cable to the battery, and wait at
Airbag
least for 2 seconds.
Sensor
CHECK:
Assembly
Front Airbag
For the connector (on the airbag sensor assembly side) be-
Sensor (LH) tween the front airbag sensor (LH) and the airbag sensor as-
Airbag Sensor
sembly, measure the voltage between SL+ and body ground.
Assembly
OK:
Voltage: Below 1 V
SL+
H02737
NG Go to step 8.
OK
2001 SIENNA (RM787U)
Author : Date : 635
DI-482
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
5 Check airbag sensor assembly.
PREPARATION:
(a) Turn the ignition switch to LOCK.
Airbag (b) Disconnect negative (-) terminal cable from the battery,
Sensor and wait at least for 90 seconds.
Assembly (c) Connect the front airbag sensor (LH) connector and air-
Front Airbag bag sensor assembly connector.
Sensor (LH) (d) Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
ACC ON
CHECK:
(a) Turn the ignition switch to ACC or ON, and wait at least
or for 20 seconds.
(b) Clear DTC stored in memory (See page DI-358 ).
DLC3 DTC B1158/B1159/16
(c) Turn the ignition switch to LOCK, and wait at least for 20
seconds.
(d) Turn the ignition switch to ACC or ON, and wait at least
for 20 seconds.
CG Tc (e) Check the DTC (See page DI-358 ).
H01369
OK:
AB0118 AB0119
H10600 H01064 H16610 DTC B1158/B1159/16 is not output.
HINT:
Codes other than DTC B1158/B1159/16 may be output at this
time, but they are not relevant to this check.
NG Replace airbag sensor assembly.
OK
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check. If the malfunctioning part can not be
detected by the simulation method, replace all SRS components including the wire harness.
2001 SIENNA (RM787U)
Author : Date : 636
DI-483
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
6 Check front airbag sensor (LH).
PREPARATION:
Disconnect the front airbag sensor connector (LH).
Airbag CHECK:
Sensor For the connector (on the front airbag sensor side), measure
Assembly the resistance between SL+ and SL-.
Front Airbag OK:
Sensor (LH) Resistance: 754 - 886
SL+ SL-
(+) (-)
H01371
H01009 H01155
NG Replace front airbag sensor (LH).
OK
Repair or replace harness or connector between the front airbag sensor (LH) and airbag sensor
assembly.
2001 SIENNA (RM787U)
Author : Date : 637
DI-484
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
7 Check wire harness (to ground).
PREPARATION:
Disconnect the front airbag sensor connector (LH).
Airbag
Sensor CHECK:
Assembly For the connector (on the airbag sensor assembly side) be-
Front Airbag tween the front airbag sensor (LH) and the airbag sensor as-
Sensor (LH) sembly, measure the resistance between body ground and
Airbag Sensor
each of SL+ and SL-.
Assembly
OK:
Resistance: 1 M or Higher
SL+
SL-
H02738
NG Repair or replace harness or connector be-
tween the front airbag sensor (LH) and airbag
assembly.
OK
Replace front airbag sensor (LH).
2001 SIENNA (RM787U)
Author : Date : 638
DI-485
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
8 Check wire harness (to B+).
PREPARATION:
Disconnect the front airbag sensor connector (LH).
Airbag
Sensor
CHECK:
Assembly For the connector (on the airbag sensor assembly side) be-
tween the front airbag sensor (LH) and the airbag sensor as-
Front Airbag
Sensor (LH)
sembly, measure the voltage between body ground and each
Airbag Sensor
of SL+ and SL-.
Assembly
OK:
Voltage: Below 1 V
SL+
SL-
H02739
NG Repair or replace harness or connector be-
tween the front airbag sensor (LH) and airbag
assembly.
OK
Replace front airbag sensor (LH).
2001 SIENNA (RM787U)
Author : Date : 639