Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 05 theft ciecupow

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
ciecupow


>> Download ciecupow documenatation <<

Text preview - extract from the document
                                                                                                                DI-535
                                         DIAGNOSTICS   -     THEFT DETERRENT SYSTEM
                                                                                                                  DI06T-10




 ECU Power Source Circuit

CIRCUIT DESCRIPTION
This circuit provides power to operate the theft deterrent ECU.

WIRING DIAGRAM




                                                                                                     Theft Deterrent ECU

                  Engine Room J/B No.2       Driver Side J/B No. 1

          3    SHORT PIN              12         3                2                                  11
                1    2 DOME              R-W                                          R
         2B                           2J        1W               1G                                  T3 +B1
   W
              FL BLOCK      Driver Side J/B No. 1                     J/B No.3
                       W-R                                 L-W
         1    ALT INP 1     4       DOOR      1                   7              18       5 L-W 1
                                                                                    L-W
         F8           F9   1B                1D                  3D              3D     IG1    T4 +B2
                                  2
                           W-R   1B
 B-L
                                                                                          W-B        7
                                                                                                     T4   E
       FL MAIN



        Battery
                                                                                 IF




                                                                                                                    I19488




2001 SIENNA (RM787U)

                                                                      Author :              Date :                689
DI-536
                                         DIAGNOSTICS   -   THEFT DETERRENT SYSTEM

INSPECTION PROCEDURE

    1      Check DOME and DOOR fuses.

                                               PREPARATION:
E/G Room J/B No.2
                    DOME Fuse                  (a) Remove DOME fuse from engine room J/B No.2.
                                               (b) Remove DOOR fuse from driver side J/B No.1.
                                               CHECK:
                                               Check continuity of DOME and DOOR fuses.
                                               OK:
                                                   Continuity



Driver Side J/B No.1
                       DOOR Fuse




                                                 NG        Check for short in all the harness and compo-
                                                           nents connected to the DOME and DOOR fuses
 I04416
 I03208                               I04882               (See attached wiring diagram).


   OK



    2      Check voltage between each of terminals +B1 and +B2 and E of theft deterrent
           ECU connector.

                                               PREPARATION:
                                               Disconnect the theft deterrent ECU connector.
                                +B1            CHECK:
                                               Measure voltage between each of terminals +B1 and +B2 and
     (+) +B2                                   E of theft deterrent ECU connector.
                                               OK:
     (-)                                             Voltage: 10-14V

                       E              I01922



                                                 OK        Proceed to next circuit inspection shown on
                                                           matrix chart (See page DI-532 ).


   NG




2001 SIENNA (RM787U)

                                                                 Author :           Date :           690
                                                                                             DI-537
                                 DIAGNOSTICS   -   THEFT DETERRENT SYSTEM



  3     Check for open in harness and connector between ECU and body ground (See
        page IN-31 ).


                                        NG         Repair or replace harness or connector.


  OK



 Check and repair harness and connector be-
 tween ECU and battery.




2001 SIENNA (RM787U)

                                                         Author :           Date :            691



◦ Jabse Service Manual Search 2026 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo