Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 05 theft cikeyunl
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download cikeyunl documenatation <<Text preview - extract from the document DI-549
DIAGNOSTICS - THEFT DETERRENT SYSTEM
DI070-08
Key Unlock Warning Switch Circuit
CIRCUIT DESCRIPTION
The key unlock warning switch goes ON when the ignition key is inserted in the key cylinder and goes OFF
when the ignition key is removed.
The ECU operates the key confinement prevention function while the key unlock warning switch is ON.
WIRING DIAGRAM
Theft Deterrent ECU
Key Unlock Driver Side J/B No.1
Warning Switch
J6 5 7 6
W-B L-B L-B O 16 O
1M 1D IG2 T3 KSW
2 1 D D
Junction
Connector
B
J3
Junction Connector
B
W-B
ED
I04435
2001 SIENNA (RM787U)
Author : Date : 703
DI-550
DIAGNOSTICS - THEFT DETERRENT SYSTEM
INSPECTION PROCEDURE
1 Check key unlock warning switch.
PREPARATION:
Disconnect key unlock warning switch connector.
2 (-)
CHECK:
Check continuity between terminal 1 and 2 of key unlock warn-
ing switch connector, when the key is inserted into the key cylin-
der or removed.
OK:
1 (+)
Switch position Tester connection Specified condition
I00297
I00296 I00305
ON (Key inserted) 1-2 Continuity
OFF (Key removed) - No continuity
NG Replace key unlock warning switch.
OK
2 Check harness and connectors between ECU and key unlock warning switch,
key unlock warning switch and body ground (See page IN-31 ).
NG Repair or replace harness or connector.
OK
Check and replace theft deterrent ECU.*1
*1: When there is a malfunction that prevents the theft deterrent
system from being set, proceed to the next numbered circuit in-
spection shown in matrix chart (See page DI-532 ).
2001 SIENNA (RM787U)
Author : Date : 704
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo